HProxy · Free Australia SOCKS4 pool

AUFree Australia SOCKS4 proxy list 2026

Every proxy below exits from Australia and is a SOCKS4 proxy. The list is re-verified every few minutes, each IP checked live for uptime, speed and anonymity, then geolocated, so what you see is current, not a stale copy-paste dump.

AUAustraliaElite
82.115.26.238:9050
52%2050 ms
SOCKS4BitCommand
AUAustraliaElite
185.113.10.22:9094
48%2334 ms
SOCKS4haderan
AUAustraliaElite
168.138.9.147:1080
39%52516 ms
SOCKS4Oracle Corporation
AUAustraliaElite
185.113.10.22:9080
14%4260 ms
SOCKS4haderan

611 more Australia SOCKS4 endpoints we are still checking

Alongside the 4 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 26,896 times across 231,799 checks we have run, the most recent of them answering 11 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free Australia SOCKS4 proxy endpoints that are not responding right now and are still being re-checked
EndpointLast answeredTimes answered
108.61.169.45:100022026-09-13 11 days ago10 / 397
175.45.182.48:10902026-09-13 11 days ago90 / 1,056
3.106.126.113:10802026-09-08 16 days ago33 / 220
16.50.48.241:588982026-09-06 18 days ago267 / 600
16.50.48.241:190022026-09-06 18 days ago102 / 415
16.50.48.241:34652026-09-06 18 days ago143 / 429
16.26.143.154:485052026-09-06 18 days ago588 / 4,562
15.134.33.120:295112026-09-06 18 days ago154 / 497
16.50.48.241:86892026-09-06 18 days ago127 / 417
16.51.148.102:561412026-09-06 18 days ago37 / 627
16.50.48.241:122812026-09-06 18 days ago432 / 753
15.135.215.62:24632026-09-06 18 days ago22 / 439
Show 88 more endpoints
Further Australia SOCKS4 proxy endpoints that are not responding right now
EndpointLast answeredTimes answered
15.135.215.62:469542026-09-06 18 days ago399 / 3,424
54.253.167.61:426602026-09-06 18 days ago375 / 3,541
15.135.215.62:180722026-09-06 18 days ago132 / 1,638
15.135.215.62:258532026-09-06 18 days ago149 / 1,925
16.50.48.241:32712026-09-06 18 days ago105 / 374
54.253.167.61:401242026-09-06 18 days ago381 / 3,666
54.253.167.61:80802026-09-06 18 days ago66 / 990
15.135.215.62:78902026-09-06 18 days ago280 / 2,717
54.253.167.61:80972026-09-06 18 days ago118 / 1,468
15.135.215.62:88852026-09-06 18 days ago69 / 1,082
15.135.215.62:212612026-09-06 18 days ago454 / 3,702
15.135.215.62:3962026-09-06 18 days ago64 / 1,021
16.26.99.200:88882026-09-06 18 days ago43 / 643
54.253.167.61:142432026-09-06 18 days ago468 / 4,028
16.26.99.200:38702026-09-06 18 days ago364 / 3,115
54.253.167.61:163812026-09-06 18 days ago194 / 2,171
15.135.215.62:383242026-09-06 18 days ago674 / 4,779
16.26.180.163:104172026-09-06 18 days ago64 / 345
16.26.99.200:43262026-09-06 18 days ago228 / 2,274
54.253.167.61:126752026-09-06 18 days ago409 / 3,702
16.26.99.200:191912026-09-06 18 days ago68 / 1,014
15.135.215.62:88652026-09-06 18 days ago96 / 1,349
16.26.99.200:98712026-09-06 18 days ago271 / 2,724
54.253.167.61:171012026-09-06 18 days ago351 / 3,304
54.253.167.61:122922026-09-06 18 days ago62 / 1,022
16.51.62.173:392772026-09-06 18 days ago457 / 3,741
54.253.167.61:429272026-09-06 18 days ago204 / 2,296
16.26.99.200:190002026-09-06 18 days ago30 / 576
16.26.99.200:476742026-09-06 18 days ago20 / 447
3.27.62.106:12252026-09-06 18 days ago132 / 389
54.253.167.61:545352026-09-06 18 days ago285 / 2,906
16.26.99.200:19762026-09-06 18 days ago15 / 365
54.253.167.61:433122026-09-06 18 days ago368 / 3,663
16.26.99.200:210892026-09-06 18 days ago447 / 3,800
16.26.99.200:84432026-09-06 18 days ago400 / 3,623
15.135.215.62:566982026-09-06 18 days ago602 / 4,592
16.26.99.200:472952026-09-06 18 days ago35 / 560
16.26.143.154:259512026-09-06 18 days ago653 / 4,739
16.50.56.246:376782026-09-06 18 days ago133 / 358
15.135.215.62:580802026-09-06 18 days ago682 / 4,776
15.135.215.62:29202026-09-06 18 days ago65 / 972
16.26.154.68:802026-09-06 18 days ago121 / 1,176
16.51.62.173:395072026-09-06 18 days ago142 / 1,086
15.135.215.62:240202026-09-06 18 days ago600 / 4,270
16.51.62.173:117232026-09-06 18 days ago180 / 1,408
16.26.143.154:526782026-09-06 18 days ago221 / 2,127
54.253.167.61:443262026-09-06 18 days ago506 / 4,206
15.135.215.62:379042026-09-06 18 days ago446 / 3,700
15.135.215.62:92542026-09-06 18 days ago542 / 4,173
15.135.215.62:409182026-09-06 18 days ago88 / 1,288
15.135.215.62:292752026-09-06 18 days ago28 / 630
15.135.215.62:105802026-09-06 18 days ago579 / 4,555
15.135.215.62:499312026-09-06 18 days ago268 / 2,599
15.135.215.62:127862026-09-06 18 days ago640 / 4,663
15.135.215.62:205662026-09-06 18 days ago658 / 4,780
15.135.215.62:143702026-09-06 18 days ago285 / 2,829
15.135.215.62:179822026-09-06 18 days ago110 / 1,692
15.135.215.62:552552026-09-06 18 days ago431 / 3,810
54.206.129.120:1222026-09-06 18 days ago274 / 2,480
15.135.215.62:99992026-09-06 18 days ago105 / 1,254
16.51.62.173:534402026-09-06 18 days ago138 / 1,191
16.26.99.200:260182026-09-06 18 days ago611 / 4,677
54.253.183.151:81082026-09-06 18 days ago480 / 4,014
15.135.215.62:3072026-09-06 18 days ago463 / 3,832
15.135.215.62:81822026-09-06 18 days ago67 / 917
54.253.183.151:86892026-09-06 18 days ago325 / 2,939
16.26.180.163:516262026-09-06 18 days ago198 / 537
54.253.183.151:59722026-09-06 18 days ago259 / 2,653
54.253.183.151:5072026-09-06 18 days ago647 / 4,705
54.253.183.151:197752026-09-06 18 days ago244 / 2,478
16.26.99.200:278402026-09-06 18 days ago529 / 4,508
16.26.99.200:487662026-09-06 18 days ago73 / 1,059
54.253.183.151:383222026-09-06 18 days ago320 / 2,903
16.26.99.200:557212026-09-06 18 days ago133 / 1,633
15.135.215.62:91412026-09-06 18 days ago418 / 3,471
54.253.167.61:590492026-09-06 18 days ago227 / 2,305
54.253.167.61:421062026-09-06 18 days ago389 / 3,646
16.26.154.68:160832026-09-06 18 days ago351 / 3,111
54.253.167.61:575382026-09-06 18 days ago319 / 3,088
54.253.183.151:79302026-09-06 18 days ago412 / 3,657
54.253.183.151:72282026-09-06 18 days ago220 / 2,274
54.253.167.61:290572026-09-06 18 days ago164 / 1,916
54.253.167.61:94022026-09-06 18 days ago107 / 1,678
54.253.167.61:34962026-09-06 18 days ago163 / 1,896
54.253.167.61:122642026-09-06 18 days ago109 / 1,528
16.26.143.154:19762026-09-06 18 days ago621 / 4,729
54.253.167.61:102026-09-06 18 days ago117 / 1,646
54.253.167.61:282592026-09-06 18 days ago151 / 1,849

Showing the 100 most recently active of 611. Every one of the rest keeps its own permanent page with its full check history.

You're viewing free Australia SOCKS4 proxies. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

Australia SOCKS4 proxies right now, by the numbers

The pool currently holds 4 Australia SOCKS4 proxies spread across 3 different networks. They respond in 4260ms at the median, much quicker than the 9054ms median across the whole free pool. The busiest exits are Melbourne. These figures come straight from the live pool and move every few minutes as proxies are re-verified.

By protocol

SOCKS44SOCKS53

By anonymity

Elite4

Biggest hosting networks

About

About these free Australia SOCKS4 proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the checker and see which proxies are alive, fast and anonymous right now.

The long read

About free Australia SOCKS4 proxies.

Free Australia SOCKS4 proxies are public IPs that exit from Australia and match the SOCKS4 filter, all free to route traffic through at no cost, and this page keeps a live-checked list of them rather than a stale dump. Each entry both places your apparent location in Australia and meets the SOCKS4 requirement, whether that is a specific protocol or anonymity grade, so you get the right kind of proxy and the right location in one slice. Because they are free and need no signup, they are the fastest way to test a Australia socks4 scenario before paying for anything.

The honest trade-off is reliability. Like all free proxies, these Australia SOCKS4 IPs are shared by many people on infrastructure nobody maintains, so they are slow, they vanish without warning, and the popular ones are often already blocked. Narrowing to both a Australia location and the SOCKS4 filter also leaves a smaller pool, so on a quiet day there may be only a handful of live entries. Treat each one as disposable: verify it works right before you use it and never push sensitive data through it.

This page narrows the public pool to SOCKS4 proxies that exit from Australia, continuously re-verified by the HProxy engine. Each one is checked live for uptime, speed and anonymity, then geolocated to the city and ISP where possible, so the entries are current rather than a stale list. The verification removes most of the dead IPs you would otherwise paste from an old list, but because this is a narrow free slice you should still confirm any Australia SOCKS4 proxy yourself before depending on it.

Combining a Australia location with the SOCKS4 filter is handy when both matter at once, for example geo-testing from Australia over a socks4 connection, or light scraping that needs a Australia vantage point with the right protocol. For sustained Australia SOCKS4 access without dead IPs, paid Australia proxies are the reliable alternative: real uptime and speed, pay by the gigabyte, no subscription. Keeping the free Australia SOCKS4 list for quick tests and paid proxies for real work is a sensible split.

01

Why combine Australia with the SOCKS4 filter?

Sometimes location alone is not enough: you need traffic to look like it comes from Australia and to use SOCKS4 specifically, because your tool, the target site, or your privacy requirement demands that exact combination. This page does both at once so you do not have to cross-reference a country list against a protocol or grade list yourself.

The narrower the filter, the smaller the live pool, which is the main catch with free combo lists. If you regularly need Australia SOCKS4 proxies and keep running out of working ones, that scarcity is the clearest sign it is time for paid proxies that always have capacity.

02

How to use free Australia SOCKS4 proxies

Pick an entry and note its IP, port and protocol, then set it in your browser proxy settings or as the proxy option in your scraper or HTTP client. Test it against a page that echoes your IP and location to confirm it is alive and reporting Australia before you rely on it. The download button gives you the whole Australia SOCKS4 slice as plain text so you can load a batch at once.

Because this is a narrow free slice, expect fewer working entries and more churn than a broad list. Pull every live candidate, rotate between them, and drop any that fail, rather than trusting a single Australia SOCKS4 IP to stay up.

03

Free vs paid Australia SOCKS4 proxies

A free Australia SOCKS4 proxy costs nothing and is fine for a quick test, but the small shared pool means slow speeds, frequent blocks, no uptime guarantee, and sometimes very few live entries at all. For a one-off check that is acceptable; for repeatable work the scarcity quickly becomes the bottleneck.

A paid proxy gives you reliable Australia capacity at the SOCKS4 level you need, on clean IPs with real uptime and speed. HProxy paid residential, ISP, mobile and datacenter proxies are billed by the gigabyte with no subscription, so you only pay for what you use while keeping the free list for experiments.

Questions

Frequently asked.

Every question

Yes. Every Australia SOCKS4 proxy on this page is free to copy and use, gathered from public sources with no signup. They are free in price but shared and unstable, so some will be slow or already offline.

The list is re-verified every few minutes. Each Australia SOCKS4 IP is rechecked live for uptime, speed and anonymity, and dead entries drop off, so it stays close to current.

Narrowing the public pool to both a Australia location and the SOCKS4 filter naturally leaves a small set, and free IPs die constantly on top of that, so on a quiet day only a handful may be live. Paid proxies avoid this by always having Australia capacity available.

HProxy paid residential, ISP, mobile and datacenter proxies give you stable Australia connections that are not pre-blocked, with real uptime and speed. You pay by the gigabyte with no subscription.

Copy the IP, port and protocol from the table and set them in your browser proxy settings or as the proxy option in your scraper or HTTP client. Test against a page that shows your IP and location to confirm it is alive and reporting Australia, and rotate through several because this narrow free slice churns fast.

It is useful when both matter at once: geo-testing or localized checks from a Australia exit IP while also needing SOCKS4 specifically, for example a particular protocol or anonymity grade for your tool.

No. Like all free proxies they are shared and run on unmaintained infrastructure, so they go offline without warning. They are fine for testing and one-off tasks, but not for anything that has to stay up.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.44/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Docs and AI

The free list, in your assistant and in your code.

We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude Code, Cursor, Windsurf or any assistant that speaks MCP, and the list's API is documented end to end.

Every product has its own reference in the docs. Something the list does not give you? Tell us.

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list.
Command line
The same tool without an assistant. Prints JSON, so it pipes.npx hproxy-mcp list --country de --protocol socks5 --limit 20
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.