HProxy · Free Australia HTTP pool

AUFree Australia HTTP proxy list 2026

Every proxy below speaks HTTP from an address in Australia, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.

Download 14 (.txt)
All free proxies
AUAustraliaElite
175.34.36.22:8888
84%1402 ms
HTTPSingTel Optus Pty Ltd
AUAustraliaElite
114.111.151.41:80
78%5250 ms
HTTPIntervolve Pty Ltd
AUAustraliaElite
130.162.192.208:8080
52%5927 ms
HTTPOracle Corporation
AUAustraliaAnonymous
162.4.38.22:8080
51%4172 ms
HTTPPT Lintas Cita Nusantara
AUAustraliaAnonymous
103.249.237.158:8888
37%15098 ms
HTTPMammoth Media Pty Ltd
AUAustraliaAnonymous
103.30.211.34:80
34%697 ms
HTTPGHOST
AUAustraliaAnonymous
103.18.205.162:8080
31%11077 ms
HTTPCIRCLE NETWORK
AUAustraliaElite
202.93.4.168:1080
30%3728 ms
HTTPMULTACOM CORPORATION
AUAustraliaAnonymous
51.161.131.235:8080
27%6968 ms
HTTPOVH
AUAustraliaAnonymous
61.29.96.146:80
26%26698 ms
HTTPAAPT Limited
AUAustraliaAnonymous
61.29.96.146:8000
25%7513 ms
HTTPAAPT Limited
AUAustraliaElite
209.38.80.141:3128
22%1032 ms
HTTPDigitalOcean, LLC
AUAustraliaElite
203.31.199.68:8118
15%4481 ms
HTTPMULTACOM CORPORATION
AUAustraliaTransparent
139.99.238.83:8080
7%1114 ms
HTTPOVH

1,288 more Australia HTTP endpoints we are still checking

Alongside the 14 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 26,301 times across 159,116 checks we have run, the most recent of them answering 4 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free Australia HTTP proxy endpoints that are not responding right now and are still being re-checked
EndpointLast answeredTimes answered
54.253.189.170:31282026-09-20 4 days ago3 / 142
45.63.26.240:802026-09-18 6 days ago1,062 / 3,079
202.86.48.105:80802026-09-17 6 days ago67 / 532
108.61.213.218:802026-09-15 9 days ago677 / 2,482
108.61.169.45:100022026-09-13 11 days ago10 / 397
202.133.89.56:50012026-09-12 11 days ago48 / 239
162.4.38.23:80802026-09-11 12 days ago666 / 3,770
103.131.232.9:80802026-09-08 15 days ago899 / 4,767
13.239.253.213:272032026-09-06 18 days ago168 / 473
16.26.154.68:512952026-09-06 18 days ago510 / 4,057
16.51.62.173:584782026-09-06 18 days ago372 / 2,760
16.51.62.173:50502026-09-06 18 days ago598 / 4,724
Show 88 more endpoints
Further Australia HTTP proxy endpoints that are not responding right now
EndpointLast answeredTimes answered
16.26.180.163:802026-09-06 18 days ago166 / 488
16.51.148.102:60442026-09-06 18 days ago167 / 2,066
3.27.62.106:88802026-09-06 18 days ago59 / 278
16.26.99.200:291542026-09-06 18 days ago72 / 754
52.62.103.7:14692026-09-06 18 days ago35 / 266
16.50.56.246:132062026-09-06 18 days ago127 / 348
15.134.33.120:237542026-09-06 18 days ago115 / 435
15.134.33.120:59522026-09-06 18 days ago246 / 610
16.50.48.241:190022026-09-06 18 days ago102 / 415
52.62.103.7:31282026-09-06 18 days ago459 / 800
16.26.154.68:134252026-09-06 18 days ago458 / 4,040
16.51.62.173:525832026-09-06 18 days ago128 / 887
16.50.56.246:288772026-09-06 18 days ago220 / 472
52.62.103.7:532172026-09-06 18 days ago157 / 467
16.26.180.163:4802026-09-06 18 days ago229 / 563
16.26.99.200:73282026-09-06 18 days ago104 / 1,290
15.135.215.62:234142026-09-06 18 days ago41 / 665
16.51.62.173:10882026-09-06 18 days ago276 / 2,190
3.26.152.74:319982026-09-06 18 days ago53 / 250
54.206.129.120:285482026-09-06 18 days ago540 / 4,174
3.27.62.106:147452026-09-06 18 days ago175 / 439
13.239.253.213:94432026-09-06 18 days ago181 / 494
3.26.152.74:20552026-09-06 18 days ago224 / 453
16.51.62.173:89542026-09-06 18 days ago171 / 1,206
16.26.180.163:233832026-09-06 18 days ago128 / 454
13.239.253.213:12242026-09-06 18 days ago50 / 290
3.26.152.74:520432026-09-06 18 days ago324 / 549
16.26.180.163:19222026-09-06 18 days ago167 / 497
16.50.48.241:60112026-09-06 18 days ago138 / 450
54.206.129.120:522882026-09-06 18 days ago61 / 797
16.26.180.163:382632026-09-06 18 days ago56 / 305
54.253.167.61:31282026-09-06 18 days ago330 / 3,035
54.253.167.61:107382026-09-06 18 days ago199 / 2,218
54.206.129.120:99912026-09-06 18 days ago2 / 191
54.206.129.120:37632026-09-06 18 days ago15 / 312
15.134.33.120:405322026-09-06 18 days ago84 / 383
16.51.62.173:80882026-09-06 18 days ago409 / 3,090
16.26.99.200:546432026-09-06 18 days ago311 / 2,893
16.50.56.246:10832026-09-06 18 days ago216 / 449
16.26.99.200:142432026-09-06 18 days ago507 / 4,076
16.26.208.68:196652026-09-06 18 days ago179 / 482
16.26.154.68:227182026-09-06 18 days ago644 / 4,704
16.26.154.68:343632026-09-06 18 days ago580 / 4,597
16.50.56.246:78902026-09-06 18 days ago208 / 442
16.26.99.200:28142026-09-06 18 days ago11 / 313
16.26.154.68:302002026-09-06 18 days ago214 / 2,100
16.26.180.163:31252026-09-06 18 days ago170 / 507
16.26.208.68:580182026-09-06 18 days ago93 / 376
15.135.215.62:1732026-09-06 18 days ago70 / 948
16.26.143.154:439862026-09-06 18 days ago197 / 2,211
54.253.167.61:157472026-09-06 18 days ago524 / 4,441
16.26.154.68:80872026-09-06 18 days ago313 / 2,727
16.26.99.200:570692026-09-06 18 days ago443 / 3,919
54.206.129.120:80912026-09-06 18 days ago413 / 3,416
16.51.62.173:136502026-09-06 18 days ago313 / 2,438
16.26.180.163:84432026-09-06 18 days ago45 / 283
16.51.62.173:584552026-09-06 18 days ago430 / 3,324
16.26.180.163:80972026-09-06 18 days ago124 / 444
16.51.5.77:258242026-09-06 18 days ago227 / 532
16.26.99.200:397372026-09-06 18 days ago437 / 3,790
54.253.183.151:396492026-09-06 18 days ago687 / 4,764
16.50.56.246:560812026-09-06 18 days ago295 / 541
16.51.62.173:575382026-09-06 18 days ago365 / 2,745
16.51.62.173:366702026-09-06 18 days ago369 / 2,864
16.50.56.246:183792026-09-06 18 days ago259 / 499
13.239.253.213:80902026-09-06 18 days ago162 / 489
16.26.180.163:104172026-09-06 18 days ago64 / 345
16.26.180.163:154682026-09-06 18 days ago193 / 520
16.51.5.77:586052026-09-06 18 days ago282 / 619
16.26.154.68:544132026-09-06 18 days ago478 / 4,038
16.26.180.163:45452026-09-06 18 days ago354 / 706
54.206.129.120:88012026-09-06 18 days ago522 / 4,206
16.26.180.163:342282026-09-06 18 days ago95 / 365
16.51.62.173:9712026-09-06 18 days ago485 / 3,521
16.26.180.163:93002026-09-06 18 days ago207 / 559
16.51.5.77:63142026-09-06 18 days ago64 / 316
16.50.56.246:232712026-09-06 18 days ago230 / 469
16.26.154.68:156862026-09-06 18 days ago650 / 4,700
16.50.48.241:249492026-09-06 18 days ago65 / 319
16.50.56.246:292502026-09-06 18 days ago173 / 397
54.253.183.151:221922026-09-06 18 days ago206 / 2,063
16.51.62.173:390792026-09-06 18 days ago269 / 1,882
16.51.62.173:460992026-09-06 18 days ago583 / 4,646
16.50.48.241:372662026-09-06 18 days ago166 / 472
16.50.56.246:352192026-09-06 18 days ago209 / 440
54.253.183.151:372662026-09-06 18 days ago192 / 2,113
52.62.103.7:173102026-09-06 18 days ago98 / 372
16.50.48.241:538942026-09-06 18 days ago362 / 691

Showing the 100 most recently active of 1,288. Every one of the rest keeps its own permanent page with its full check history.

You're viewing free Australia HTTP proxies. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

Australia HTTP proxies right now, by the numbers

The pool currently holds 14 Australia HTTP proxies spread across 11 different networks. They respond in 5250ms at the median, much quicker than the 9120ms median across the whole free pool. The busiest exits are Sydney, Melbourne, Albury. These figures come straight from the live pool and move every few minutes as proxies are re-verified.

By protocol

HTTP14HTTPS6

By anonymity

Elite6Anonymous7Transparent1

About

About these free Australia HTTP proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the checker and see which proxies are alive, fast and anonymous right now.

Open the free proxy checkerIP lookup

The long read

About free Australia HTTP proxies.

The list above holds every free HTTP proxy in Australia that answered our checker recently. At 16:51 UTC on 15 September 2026, 5 HTTP entries in Australia were alive.

That is 100.0 percent of the 5 live entries in Australia at the same moment. HTTP was the most common protocol in the country, ahead of HTTPS with 0 live entries. Among the 97 countries with live HTTP entries, Australia held the 47th largest number.

5 live entries are too few for a fair success rate, so this page reports counts.

All 5 live entries were flagged for recent abuse, and 2 sat on datacenter space. For work that has to keep running, paid Australia proxies are built for it.

01

HTTP entries in Australia against the rest of the pool

The table compares these entries with all of Australia and with HTTP entries worldwide.

Live Australia HTTP entries against the wider pool
Measured 15 September 2026Australia HTTPAustralia, every protocolHTTP, every country
Live entries553,208
Classed as datacenter40.0%40.0%59.3%
Flagged for recent abuse100.0%100.0%97.2%

HProxy free pool, one read-only query at 16:51 UTC on 15 September 2026.

02

How the Australia HTTP entries were graded

The live entries split across the grades, so check each entry's grade before you pick one.

Anonymity grade of the live Australia HTTP entries
Grade at the last checkLive entries
Elite2
Anonymous3
Transparent0
All live Australia HTTP entries5

HProxy free pool, live set at 16:51 UTC on 15 September 2026.

03

What a free Australia HTTP proxy can reach

On 15 September 2026 we tested 11 Australia HTTP entries from our server in Germany. Through each one, the server fetched Cloudflare's trace page over plain HTTP and TLS, then Google's connectivity check.

Australia HTTP entries, tested through the entry itself
Tested 15 September 2026Entries
Tested11
Did not accept a connection3
Completed at least one request2
Carried encrypted traffic0
Opened Google0
Certificate did not verify0
Showed an exit address2
Of those, exiting in Australia2

HProxy test from one server in Germany. Every entry on the Australia list was tested. Exit countries from Cloudflare's own trace. An entry that listed several protocols was tested over one: SOCKS5 first, then HTTPS, HTTP and SOCKS4.

None of the tested entries carried encrypted traffic all the way to the site.

04

Networks under the Australia HTTP entries

The largest network under these entries was AAPT, with 1 of the 5 live entries. The names below are the network names our address data records for each AS number.

Networks under the live Australia HTTP entries
NetworkAS numberLive entriesClassed as datacenter
AAPT LimitedAS276410
SingTel Optus Pty LtdAS480410
OVHAS1627611
The Constant Company, LLCAS2047311
Intervolve Pty LtdAS4557710
All live Australia HTTP entriesAll networks52

HProxy free pool, live set at 16:51 UTC on 15 September 2026.

05

How to use a free Australia HTTP proxy

Enter an entry as http://IP:PORT in your client, then request a page that echoes your address. Take several entries and rotate between them, because a free entry can drop between two checks.

Questions

Frequently asked.

Every question

Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.

At 16:51 UTC on 15 September 2026, 5 HTTP entries in Australia were alive. Among the 97 countries with live HTTP entries, Australia held the 47th largest number.

On 15 September 2026 the largest networks were AAPT, SingTel Optus and OVH. Our address data classed 2 of the 5 live entries as datacenter space.

No, a plain HTTP request travels as clear text, so whoever runs the proxy can read it.

Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, all 5 live entries were flagged for recent abuse.

For work that has to keep running, HProxy sells Australia proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.44/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Docs and AI

The free list, in your assistant and in your code.

We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude Code, Cursor, Windsurf or any assistant that speaks MCP, and the list's API is documented end to end.

Read the API docsSet up your assistant

Every product has its own reference in the docs. Something the list does not give you? Tell us.

Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.

MCP server

Built by us: the free proxy list, the checker and the IP lookup as tools in Claude Code, Claude Desktop, Cursor, Windsurf or anything on stdio. No key, no account.

Add it to your assistant

CLI

The list from a terminal: npx hproxy-mcp list --country de --limit 20. One line, nothing to install.

See the commands

API docs

The free list's API, documented end to end with real responses: the filters, the formats, the limits.

Read the docs

llms.txt

The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.

Open llms.txt

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list.
Command line
The same tool without an assistant. Prints JSON, so it pipes.npx hproxy-mcp list --country de --protocol socks5 --limit 20
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.