HProxy · Free Australia Elite pool
Free Australia Elite proxy list 2026
Every proxy below exits from Australia and is a Elite proxy. The list is re-verified every few minutes, each IP checked live for uptime, speed and anonymity, then geolocated, so what you see is current, not a stale copy-paste dump.
Australia Elite proxies right now, by the numbers
The pool currently holds 262 Australia Elite proxies spread across 11 different networks. They respond in 1743ms at the median, much quicker than the 6691ms median across the whole free pool. The busiest exits are Melbourne, Sydney, Albury. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By protocol
By anonymity
Biggest hosting networks
About
About these free Australia Elite proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Verify before you use
Run any list through the checker and see which proxies are alive, fast and anonymous right now.
The long read
About free Australia Elite proxies.
Free Australia Elite proxies are public IPs that exit from Australia and match the Elite filter, all free to route traffic through at no cost, and this page keeps a live-checked list of them rather than a stale dump. Each entry both places your apparent location in Australia and meets the Elite requirement, whether that is a specific protocol or anonymity grade, so you get the right kind of proxy and the right location in one slice. Because they are free and need no signup, they are the fastest way to test a Australia elite scenario before paying for anything.
The honest trade-off is reliability. Like all free proxies, these Australia Elite IPs are shared by many people on infrastructure nobody maintains, so they are slow, they vanish without warning, and the popular ones are often already blocked. Narrowing to both a Australia location and the Elite filter also leaves a smaller pool, so on a quiet day there may be only a handful of live entries. Treat each one as disposable: verify it works right before you use it and never push sensitive data through it.
This page narrows the public pool to Elite proxies that exit from Australia, continuously re-verified by the HProxy engine. Each one is checked live for uptime, speed and anonymity, then geolocated to the city and ISP where possible, so the entries are current rather than a stale list. The verification removes most of the dead IPs you would otherwise paste from an old list, but because this is a narrow free slice you should still confirm any Australia Elite proxy yourself before depending on it.
Combining a Australia location with the Elite filter is handy when both matter at once, for example geo-testing from Australia over a elite connection, or light scraping that needs a Australia vantage point with the right protocol. For sustained Australia Elite access without dead IPs, paid Australia proxies are the reliable alternative: real uptime and speed, pay by the gigabyte, no subscription. Keeping the free Australia Elite list for quick tests and paid proxies for real work is a sensible split.
01
Why combine Australia with the Elite filter?
Sometimes location alone is not enough: you need traffic to look like it comes from Australia and to use Elite specifically, because your tool, the target site, or your privacy requirement demands that exact combination. This page does both at once so you do not have to cross-reference a country list against a protocol or grade list yourself.
The narrower the filter, the smaller the live pool, which is the main catch with free combo lists. If you regularly need Australia Elite proxies and keep running out of working ones, that scarcity is the clearest sign it is time for paid proxies that always have capacity.
02
How to use free Australia Elite proxies
Pick an entry and note its IP, port and protocol, then set it in your browser proxy settings or as the proxy option in your scraper or HTTP client. Test it against a page that echoes your IP and location to confirm it is alive and reporting Australia before you rely on it. The download button gives you the whole Australia Elite slice as plain text so you can load a batch at once.
Because this is a narrow free slice, expect fewer working entries and more churn than a broad list. Pull every live candidate, rotate between them, and drop any that fail, rather than trusting a single Australia Elite IP to stay up.
03
Free vs paid Australia Elite proxies
A free Australia Elite proxy costs nothing and is fine for a quick test, but the small shared pool means slow speeds, frequent blocks, no uptime guarantee, and sometimes very few live entries at all. For a one-off check that is acceptable; for repeatable work the scarcity quickly becomes the bottleneck.
A paid proxy gives you reliable Australia capacity at the Elite level you need, on clean IPs with real uptime and speed. HProxy paid residential, ISP, mobile and datacenter proxies are billed by the gigabyte with no subscription, so you only pay for what you use while keeping the free list for experiments.
Questions
Frequently asked.
Yes. Every Australia Elite proxy on this page is free to copy and use, gathered from public sources with no signup. They are free in price but shared and unstable, so some will be slow or already offline.
The list is re-verified every few minutes. Each Australia Elite IP is rechecked live for uptime, speed and anonymity, and dead entries drop off, so it stays close to current.
Narrowing the public pool to both a Australia location and the Elite filter naturally leaves a small set, and free IPs die constantly on top of that, so on a quiet day only a handful may be live. Paid proxies avoid this by always having Australia capacity available.
HProxy paid residential, ISP, mobile and datacenter proxies give you stable Australia connections that are not pre-blocked, with real uptime and speed. You pay by the gigabyte with no subscription.
Copy the IP, port and protocol from the table and set them in your browser proxy settings or as the proxy option in your scraper or HTTP client. Test against a page that shows your IP and location to confirm it is alive and reporting Australia, and rotate through several because this narrow free slice churns fast.
It is useful when both matter at once: geo-testing or localized checks from a Australia exit IP while also needing Elite specifically, for example a particular protocol or anonymity grade for your tool.
No. Like all free proxies they are shared and run on unmaintained infrastructure, so they go offline without warning. They are fine for testing and one-off tasks, but not for anything that has to stay up.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
Docs and AI
The free list, in your assistant and in your code.
We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude Code, Cursor, Windsurf or any assistant that speaks MCP, and the list's API is documented end to end.
Every product has its own reference in the docs. Something the list does not give you? Tell us.
Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.
MCP server
Built by us: the free proxy list, the checker and the IP lookup as tools in Claude Code, Claude Desktop, Cursor, Windsurf or anything on stdio. No key, no account.
CLI
The list from a terminal: npx hproxy-mcp list --country de --limit 20. One line, nothing to install.
API docs
The free list's API, documented end to end with real responses: the filters, the formats, the limits.
llms.txt
The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.
All the machine lanes- MCP server
- Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.
claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list. - Command line
- The same tool without an assistant. Prints JSON, so it pipes.
npx hproxy-mcp list --country de --protocol socks5 --limit 20 - REST, no key
- Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.