HProxy · Port pool

Free port 10800 proxies 2026

Port 10800

Every proxy below answers on port 10800. The list is re-verified every few minutes, each IP checked live for uptime, speed and anonymity, then geolocated, so what you see is current rather than a stale copy-paste dump. We hold 119 further endpoints on port 10800 that answered while we were watching and are not responding right now, and we keep re-testing every one. Click any IP for its live status.

Download 16 (.txt)
All free proxies

Showing only proxies on port 10800. The filters below search inside this port.

Search every port instead
FRFranceAnonymous
195.154.84.121:10800
89%5339 ms
HTTPFR-SCALEWAY-960827
CNChinaElite
171.221.240.100:10800
52%3430 ms
SOCKS4Chinanet
LVLatviaElite
212.3.206.215:10800
41%9777 ms
SOCKS5Riga, Latvia
USUnited StatesElite
47.85.9.228:10800
39%14229 ms
SOCKS4Alibaba (US) Technology Co., Ltd.
CNChinaElite
58.18.39.58:10800
32%9479 ms
SOCKS4CHINA UNICOM China169 Backbone
AEUnited Arab EmiratesElite
2.50.191.180:10800
31%5943 ms
SOCKS5Emirates Internet
NPNepalElite
202.79.47.159:10800
31%6472 ms
SOCKS4WorldLink Communications
CNChinaElite
61.191.119.134:10800
31%9624 ms
SOCKS4Chinanet
CNChinaElite
171.221.174.186:10800
29%7349 ms
SOCKS4Chinanet
CNChinaElite
58.218.169.186:10800
27%5227 ms
SOCKS4Chinanet
CNChinaElite
221.226.188.218:10800
23%3483 ms
SOCKS4Chinanet
CNChinaElite
117.134.203.58:10800
22%3468 ms
SOCKS5China Mobile
NLNetherlandsElite
5.253.29.180:10800
13%1776 ms
SOCKS5NETRANEX TECHNOLOGIES (INDIA) PRIVATE LIMITED
AEUnited Arab EmiratesElite
217.165.51.161:10800
13%6262 ms
SOCKS5Emirates Internet
NLNetherlandsTransparent
144.124.251.24:10800
9%576 ms
HTTPVDSINA
PKPakistanElite
103.131.215.221:10800
4%9540 ms
SOCKS5INSTACOM Pvt. LTD

108 more port 10800 endpoints we are still checking

Alongside the 16 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 13,338 times across 72,349 checks we have run, the most recent of them answering 3 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free port 10800 proxy endpoints that are not responding right now and are still being re-checked
EndpointLocationLast answeredTimes answered
16.51.5.77:10800AUAustralia2026-10-09 3 days ago170 / 1,244
56.155.73.159:10800JPJapan2026-10-09 3 days ago70 / 1,590
45.59.123.127:10800CHSwitzerland2026-10-09 3 days ago5 / 324
8.222.182.89:10800SGSingapore2026-10-08 4 days ago333 / 553
45.74.31.42:10800USUnited States2026-10-07 6 days ago4 / 469
45.74.31.23:10800USUnited States2026-10-07 6 days ago12 / 343
39.170.29.226:10800CNChina2026-10-06 6 days ago87 / 704
137.74.50.101:10800FRFrance2026-10-05 7 days ago7 / 184
115.204.7.178:10800CNChina2026-10-05 7 days ago29 / 213
78.17.187.19:10800IEIreland2026-10-04 9 days ago33 / 210
14.225.204.32:10800VNVietnam2026-10-03 9 days ago2,202 / 2,744
18.230.23.72:10800BRBrazil2026-10-03 9 days ago5 / 262
Show 96 more endpoints
Further port 10800 proxy endpoints that are not responding right now
EndpointLocationLast answeredTimes answered
16.28.101.55:10800ZASouth Africa2026-10-03 10 days ago75 / 1,111
45.74.31.46:10800USUnited States2026-10-03 10 days ago3 / 288
117.28.130.247:10800CNChina2026-10-03 10 days ago4 / 188
69.174.54.224:10800USUnited States2026-10-02 10 days ago4 / 212
69.174.54.157:10800USUnited States2026-10-02 11 days ago4 / 202
45.80.37.229:10800NLNetherlands2026-10-01 11 days ago3 / 154
13.206.73.237:10800INIndia2026-09-28 14 days ago8 / 496
78.137.88.66:10800YEYemen2026-09-27 15 days ago10 / 102
2.50.190.117:10800AEUnited Arab Emirates2026-09-25 17 days ago44 / 312
125.123.187.70:10800CNChina2026-09-24 18 days ago49 / 226
171.221.176.137:10800CNChina2026-09-23 19 days ago1,172 / 5,438
103.131.104.125:10800IDIndonesia2026-09-23 19 days ago36 / 1,260
147.161.246.246:10800CHSwitzerland2026-09-21 21 days ago11 / 187
45.74.31.30:10800USUnited States2026-09-19 23 days ago8 / 414
15.240.165.254:10800ZASouth Africa2026-09-17 25 days ago169 / 783
2.184.51.130:10800IRIran2026-09-14 29 days ago96 / 1,146
45.74.31.40:10800USUnited States2026-09-13 a month ago9 / 304
103.247.120.51:10800IDIndonesia2026-09-12 a month ago2 / 315
45.74.31.50:10800USUnited States2026-09-12 a month ago6 / 242
52.78.169.234:10800KRSouth Korea2026-09-10 a month ago174 / 649
43.209.212.140:10800THThailand2026-09-10 a month ago233 / 773
3.127.27.51:10800DEGermany2026-09-10 a month ago143 / 1,370
16.112.59.202:10800INIndia2026-09-10 a month ago1 / 218
18.132.38.209:10800GBUnited Kingdom2026-09-09 a month ago97 / 550
18.145.194.21:10800USUnited States2026-09-09 a month ago388 / 909
105.138.220.189:10800MAMorocco2026-09-08 a month ago3 / 215
78.13.203.169:10800MXMexico2026-09-06 a month ago142 / 455
18.191.191.74:10800USUnited States2026-09-06 a month ago108 / 376
43.200.174.95:10800KRSouth Korea2026-09-06 a month ago75 / 918
78.12.252.87:10800MXMexico2026-09-06 a month ago68 / 704
44.204.11.88:10800USUnited States2026-09-06 a month ago173 / 467
13.245.171.157:10800ZASouth Africa2026-09-05 a month ago39 / 515
194.87.109.183:10800CHSwitzerland2026-09-05 a month ago23 / 378
51.89.253.203:10800GBUnited Kingdom2026-09-05 a month ago9 / 233
103.73.67.219:10800HKHong Kong2026-09-04 a month ago1 / 252
46.29.167.144:10800RURussia2026-08-31 a month ago20 / 206
165.225.66.38:10800CHSwitzerland2026-08-31 a month ago97 / 433
31.56.32.59:10800DEGermany2026-08-28 2 months ago221 / 1,924
193.233.126.24:10800NLNetherlands2026-08-28 2 months ago146 / 702
149.248.38.229:10800USUnited States2026-08-25 2 months ago33 / 300
220.167.89.10:10800CNChina2026-08-25 2 months ago787 / 4,207
222.209.81.12:10800CNChina2026-08-25 2 months ago622 / 4,074
103.84.110.51:10800HKHong Kong2026-08-25 2 months ago13 / 260
31.40.198.17:10800TRTurkey2026-08-24 2 months ago235 / 955
140.150.236.191:10800HKHong Kong2026-08-21 2 months ago18 / 528
146.56.185.39:10800KRSouth Korea2026-08-20 2 months ago26 / 790
147.161.246.38:10800CHSwitzerland2026-08-20 2 months ago58 / 331
147.161.246.37:10800CHSwitzerland2026-08-20 2 months ago99 / 471
147.161.246.16:10800CHSwitzerland2026-08-20 2 months ago2 / 240
147.161.246.47:10800CHSwitzerland2026-08-20 2 months ago2 / 240
171.223.105.149:10800CNChina2026-08-20 2 months ago30 / 418
89.189.85.125:10800YEYemen2026-08-19 2 months ago3 / 253
188.75.80.158:10800IRIran2026-08-18 2 months ago11 / 319
91.239.6.32:10800ALAlbania2026-08-13 2 months ago127 / 531
171.217.69.113:10800CNChina2026-08-13 2 months ago517 / 3,540
212.113.99.167:10800DEGermany2026-08-12 2 months ago365 / 647
47.75.116.41:10800HKHong Kong2026-08-12 2 months ago968 / 1,234
115.227.223.31:10800CNChina2026-08-10 2 months ago8 / 283
178.239.151.162:10800IRIran2026-08-08 2 months ago75 / 390
141.11.187.9:10800NLNetherlands2026-08-08 2 months ago11 / 374
183.141.133.25:10800CNChina2026-08-07 2 months ago20 / 295
104.234.172.217:10800USUnited States2026-08-06 2 months ago3 / 268
38.207.166.79:10800USUnited States2026-08-06 2 months ago137 / 615
103.195.191.39:10800SGSingapore2026-08-05 2 months ago164 / 441
39.129.129.165:10800CNChina2026-08-04 2 months ago615 / 3,168
45.77.42.88:10800SGSingapore2026-08-03 2 months ago7 / 272
89.144.20.144:10800TRTurkey2026-08-03 2 months ago27 / 477
209.146.113.192:10800USUnited States2026-08-03 2 months ago221 / 653
38.181.42.234:10800USUnited States2026-08-01 2 months ago1 / 274
64.83.41.242:10800JPJapan2026-08-01 2 months ago60 / 668
140.83.60.69:10800JPJapan2026-07-30 2 months ago553 / 988
157.254.32.52:10800HKHong Kong2026-07-30 2 months ago116 / 438
173.254.213.89:10800USUnited States2026-07-29 3 months ago118 / 573
192.227.241.55:10800USUnited States2026-07-28 3 months ago4 / 279
89.44.86.33:10800RURussia2026-07-25 3 months ago12 / 308
183.141.55.63:10800CNChina2026-07-24 3 months ago80 / 460
38.47.110.6:10800JPJapan2026-07-21 3 months ago52 / 380
125.120.248.100:10800CNChina2026-07-21 3 months ago33 / 361
117.28.160.70:10800CNChina2026-07-20 3 months ago5 / 291
218.83.201.226:10800CNChina2026-07-20 3 months ago201 / 1,862
206.123.156.218:10800IRIran2026-07-14 3 months ago1 / 288
206.123.156.219:10800IRIran2026-06-23 4 months ago1 / 303
206.123.156.233:10800IRIran2026-06-19 4 months ago3 / 338
206.123.156.220:10800IRIran2026-06-17 4 months ago9 / 354
206.123.156.209:10800IRIran2026-06-17 4 months ago1 / 348
206.123.156.230:10800IRIran2026-06-15 4 months ago2 / 135
206.123.156.200:10800IRIran2026-06-14 4 months ago5 / 283
206.123.156.217:10800IRIran2026-06-14 4 months ago7 / 349
206.123.156.224:10800IRIran2026-06-14 4 months ago8 / 358
206.123.156.235:10800IRIran2026-06-14 4 months ago8 / 205
206.123.156.231:10800IRIran2026-06-14 4 months ago1 / 136
206.123.156.214:10800IRIran2026-06-14 4 months ago5 / 259
206.123.156.204:10800IRIran2026-06-14 4 months ago4 / 358
206.123.156.189:10800IRIran2026-06-14 4 months ago2 / 247
206.123.156.195:10800IRIran2026-06-14 4 months ago10 / 327
206.123.156.222:10800IRIran2026-06-14 4 months ago1 / 138

You're viewing free proxies on port 10800. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

Every slice of the pool

The same live list, one thing at a time.

A page per country, protocol, anonymity grade, operator, port, network and block, each with its own count, download and API call.

port 10800 proxies right now, by the numbers

The pool currently holds 16 port 10800 proxies spread across 11 different networks. They respond in 6262ms at the median, much slower than the 2778ms median across the whole free pool. The busiest exits are Beijing, Chengdu, Amsterdam. These figures come straight from the live pool and move every few minutes as proxies are re-verified.

By protocol

HTTP2SOCKS48SOCKS56

By anonymity

Elite14Anonymous1Transparent1

Biggest hosting networks

China Telecom5Emirates2Scaleway1WorldLink1Riga Latvia1Vdsina1Netranex Private1China Mobile1

About

About these port 10800 proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.

Get the free appCheck onlineIP lookup

The long read

About free proxies on port 10800.

Free proxies on port 10800 are public proxy servers that accept connections on that specific port. This page keeps a live-checked list of them: every entry was seen answering on port 10800 and re-verified continuously for uptime, speed and anonymity, so what you copy is current rather than a stale dump republished from somewhere else.

A port number is just the door a service listens behind, so what matters on this page is measurement rather than convention: the breakdown above shows how many proxies answer on port 10800 right now, which protocols they speak and where they exit. Ports without a famous default service still accumulate proxies through software defaults, port-forwarding habits and the lists that republish them.

01

What is port 10800?

A port is the numbered door a connection knocks on: an address like 203.0.113.9:10800 means "this machine, door 10800". Ports 0 to 1023 are reserved for well-known services and need elevated privileges to bind; everything above is open territory, which is where most proxy software lives. Our database records every ip:port pair separately because each one is genuinely a separate endpoint.

02

How to use a port 10800 proxy

Copy an entry from the table and set the IP and port in your browser's proxy settings or your HTTP client, matching the protocol the list shows for it. The port is not optional: the same IP without 10800 points at nothing. Test against a page that echoes your address before trusting it with real work, and click any IP for its full record.

Free proxies churn whatever port they sit on, so pull several candidates and rotate. If a firewall sits between you and the internet, note that unusual ports are exactly what restrictive networks block first; proxies on 443 or 80 travel furthest.

03

Free port 10800 proxies vs paid proxies

Everything here is free, public and shared, which is fine for testing, research and one-off checks. The trade-off is the same on every port: no uptime promise, unpredictable speed, and neighbours you cannot choose.

HProxy's paid residential, ISP, mobile and datacenter proxies run on stable infrastructure with clean IPs, billed by the gigabyte with no subscription. Keep the free port 10800 list for what it is good at and reach for paid the moment a task has to succeed.

Questions

Frequently asked.

Every question

Public proxy servers that accept connections on port 10800. This page lists the ones currently in the HProxy pool that answered on that port at their last live check, with protocol, country, latency and uptime for each.

Yes. Everything listed is free to copy and use, no signup. Free means shared and unstable, so verify an entry right before you rely on it.

The port does not change the trust question: any public proxy is operated by someone you have no agreement with. Keep logins, payments and anything private off free proxies on every port; use them for low-stakes lookups and testing.

Mostly software defaults and habit: proxy servers ship with a port picked by their authors, operators forward what is memorable, and public lists then keep re-testing the ports they already know. The population on this page is what that process has produced on port 10800.

Continuously. Every endpoint is re-verified on a rolling cycle; an address that stops answering moves out of the live list into the permanent record, and returns the moment it answers again.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.44/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Docs and AI

The free list, in your assistant and in your code.

We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.

Read the API docsSet up your assistant

Every product has its own reference in the docs. Something the list does not give you? Tell us.

Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.

MCP server

Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.

Add it to your assistant

CLI

The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.

See the commands

API docs

The free list's API, documented end to end with real responses: the filters, the formats, the limits.

Read the docs

llms.txt

The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.

Open llms.txt

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list.
Command line
The same tool without an assistant, from a terminal. Add --json for JSON.hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows).
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.