HProxy · Free Yemen pool

YEFree Yemen proxy list 2026

Every proxy below sits on an address in Yemen, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.

Download 2 (.txt)
All free proxies
YEYemenTransparent
209.198.150.223:8085
75%6641 ms
HTTPSpace Exploration Technologies Corporation
YEYemenElite
82.114.181.147:9050
37%6735 ms
SOCKS4PTC-YemenNet

222 more Yemen endpoints we are still checking

Alongside the 2 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 3,017 times across 28,404 checks we have run, the most recent of them answering 3 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free Yemen proxy endpoints that are not responding right now and are still being re-checked
EndpointLast answeredTimes answered
110.238.44.85:80802026-11-07 3 days ago3 / 292
134.35.153.153:10802026-11-06 4 days ago3 / 174
178.130.106.12:10802026-11-02 8 days ago4 / 185
134.35.167.203:10802026-11-02 8 days ago5 / 187
188.240.114.130:10802026-11-01 9 days ago8 / 192
134.35.174.225:10802026-10-31 10 days ago13 / 197
89.189.75.118:80802026-10-30 11 days ago10 / 487
89.189.84.62:90902026-10-30 11 days ago7 / 192
46.161.230.252:80802026-10-29 12 days ago1 / 336
134.35.199.193:10802026-10-29 12 days ago8 / 191
109.200.191.138:80852026-10-27 14 days ago36 / 235
89.189.74.151:10802026-10-25 16 days ago28 / 247
Show 88 more endpoints
Further Yemen proxy endpoints that are not responding right now
EndpointLast answeredTimes answered
134.35.154.183:10802026-10-23 17 days ago2 / 200
89.189.92.253:108002026-10-23 18 days ago20 / 227
178.130.86.123:10802026-10-21 20 days ago5 / 204
5.255.15.162:10802026-10-21 20 days ago7 / 205
94.26.216.45:10802026-10-18 23 days ago18 / 237
178.130.118.81:10802026-10-18 23 days ago43 / 250
178.130.105.219:10802026-10-17 24 days ago2 / 189
178.130.64.94:10802026-10-15 26 days ago1 / 178
134.35.129.34:10802026-10-15 26 days ago1 / 184
5.255.25.129:80802026-10-14 27 days ago22 / 192
109.200.191.138:80802026-10-13 28 days ago30 / 391
134.35.236.187:10802026-10-13 28 days ago10 / 177
134.35.190.22:10802026-10-13 28 days ago36 / 224
134.35.181.155:10802026-10-13 28 days ago46 / 223
134.35.140.57:10802026-10-13 28 days ago36 / 211
134.35.196.123:10802026-10-13 28 days ago21 / 207
134.35.215.62:10802026-10-13 28 days ago24 / 210
134.35.138.98:10802026-10-13 28 days ago11 / 190
134.35.216.123:10802026-10-13 28 days ago24 / 499
134.35.252.6:10802026-10-12 28 days ago31 / 212
134.35.211.133:10802026-10-12 29 days ago14 / 194
134.35.175.65:10802026-10-12 29 days ago1 / 179
134.35.235.150:10802026-10-12 29 days ago21 / 200
134.35.239.251:10802026-10-12 29 days ago9 / 189
134.35.244.214:10802026-10-11 a month ago18 / 211
134.35.234.101:10802026-10-11 a month ago38 / 262
134.35.248.11:10802026-10-10 a month ago10 / 245
134.35.164.31:10802026-10-10 a month ago11 / 218
134.35.177.0:10802026-10-10 a month ago13 / 216
134.35.181.51:10802026-10-10 a month ago12 / 217
134.35.217.157:10802026-10-10 a month ago20 / 234
213.246.8.19:10802026-10-10 a month ago4 / 220
213.246.30.109:10802026-10-10 a month ago13 / 220
213.246.15.142:10802026-10-10 a month ago12 / 223
134.35.237.180:10802026-10-10 a month ago7 / 211
134.35.201.158:10802026-10-10 a month ago8 / 216
134.35.204.17:10802026-10-10 a month ago5 / 209
213.246.26.118:10802026-10-10 a month ago1 / 208
213.246.3.237:10802026-10-09 a month ago6 / 254
134.35.200.30:10802026-10-08 a month ago5 / 221
134.35.225.111:10802026-10-08 a month ago5 / 395
134.35.237.71:10802026-10-05 a month ago7 / 228
94.26.194.42:10802026-10-05 a month ago10 / 232
178.130.87.47:10802026-10-05 a month ago2 / 227
188.240.101.68:10802026-10-03 a month ago2 / 281
134.35.176.96:10802026-10-03 a month ago29 / 267
134.35.149.18:10802026-10-02 a month ago15 / 247
134.35.153.130:10802026-10-02 a month ago14 / 250
134.35.162.114:10802026-10-02 a month ago5 / 237
134.35.137.13:10802026-10-02 a month ago4 / 228
134.35.132.115:10802026-10-02 a month ago3 / 230
134.35.242.98:10802026-10-02 a month ago2 / 230
134.35.253.170:10802026-10-02 a month ago4 / 226
134.35.203.169:10802026-10-02 a month ago5 / 224
134.35.211.46:10802026-10-02 a month ago4 / 218
188.240.125.192:10802026-10-02 a month ago9 / 225
188.209.231.129:10802026-10-01 a month ago3 / 196
178.130.108.207:10802026-10-01 a month ago6 / 202
178.130.96.199:10802026-10-01 a month ago3 / 197
178.130.100.121:10802026-10-01 a month ago3 / 195
188.240.107.176:10802026-09-30 a month ago3 / 268
178.130.101.245:10802026-09-30 a month ago1 / 156
134.35.167.157:80802026-09-29 a month ago12 / 148
89.189.83.154:80802026-09-28 a month ago8 / 141
178.130.73.177:10802026-09-28 a month ago2 / 132
78.137.88.66:108002026-09-27 a month ago10 / 150
89.189.73.182:80802026-09-25 2 months ago44 / 480
175.110.6.104:10802026-09-23 2 months ago25 / 240
213.246.15.243:10802026-09-21 2 months ago2 / 219
82.114.181.147:80802026-09-19 2 months ago1,728 / 4,482
178.130.103.252:80802026-09-19 2 months ago22 / 356
89.189.76.89:80802026-09-16 2 months ago32 / 305
109.74.42.71:10802026-09-15 2 months ago2 / 252
5.255.29.219:10802026-09-15 2 months ago7 / 263
178.130.69.107:10802026-09-14 2 months ago6 / 268
178.130.91.4:10802026-09-14 2 months ago3 / 257
46.35.93.100:90902026-09-13 2 months ago20 / 288
134.35.233.179:80802026-09-12 2 months ago13 / 276
134.35.175.8:80802026-09-11 2 months ago8 / 271
109.200.173.157:80852026-09-11 2 months ago12 / 276
188.240.119.53:80802026-09-11 2 months ago20 / 301
178.130.103.125:10802026-09-09 2 months ago27 / 325
178.130.93.130:10802026-09-08 2 months ago13 / 277
134.35.1.149:80802026-09-08 2 months ago42 / 324
134.35.15.190:10802026-09-08 2 months ago15 / 283
178.130.112.169:80802026-09-08 2 months ago24 / 302
131.117.165.253:80802026-09-07 2 months ago17 / 282
89.189.64.195:80802026-09-07 2 months ago20 / 475

Showing the 100 most recently active of 222. Every one of the rest keeps its own permanent page with its full check history.

You're viewing free Yemen proxies. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

Every slice of the pool

The same live list, one thing at a time.

A page per country, protocol, anonymity grade, operator, port, network and block, each with its own count, download and API call.

Yemen proxies right now, by the numbers

The pool currently holds 2 Yemen proxies spread across 2 different networks. They respond in 6735ms at the median, much slower than the 1974ms median across the whole free pool. The busiest exits are Aden, Sanaa. These figures come straight from the live pool and move every few minutes as proxies are re-verified.

By protocol

HTTP1SOCKS41

By anonymity

Elite1Transparent1

Biggest hosting networks

Space Exploration1PTC YemenNet1

About

About these free Yemen proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.

Get the free appCheck onlineIP lookup

The long read

About free Yemen proxies.

The list above holds every free proxy in Yemen that answered our checker recently. Copy an address and port, and sites you open will see an address in Yemen.

At 09:10 UTC on 15 September 2026, no entry in Yemen was alive. 7 entries were still in rotation and re-checked on a rolling cycle.

Entries in Yemen that worked and then stopped lasted a median 6.5 hours. On 28 September 2026, that was shorter than the whole pool's median of 10 days. 13.0 percent stopped within their first hour, and 5.3 percent lasted over thirty days. We count each entry from the day we first saw it until it stopped answering. We only count addresses with fewer than 20 of these entries. No address in Yemen had that many, so this rule left nothing out. We also leave out Amazon's networks and one June evening when our checker failed. Most never worked at all: 549 of the 696 entries we set aside never answered a check.

01

How to use a free Yemen proxy

Pick a row and note its address, port and protocol before you set it in your tool. HTTP and HTTPS entries suit browsers and scrapers, while SOCKS5 entries also carry traffic from other tools.

Take several entries and rotate between them, because a free entry can drop between two checks. A free SOCKS5 entry adds no encryption of its own, so never send a password through one.

Questions

Frequently asked.

Every question

Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.

Treat them as public, because whoever runs the server can read any traffic that is not encrypted.

Half of those that worked were gone within 6.5 hours, against 10 days for the whole free pool. We count each one from the day we first saw it until it stopped answering. Both figures count only addresses with fewer than 20 of these entries. They also leave out Amazon's networks and one June evening when our checker failed. We measured them on 28 September 2026. Of the entries we set aside, 549 of 696 never answered a check.

For work that has to keep running, HProxy sells Yemen proxies with city targeting. They are pay as you go with no subscription, and purchased traffic has no scheduled expiry date.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.18/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Docs and AI

The free list, in your assistant and in your code.

We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.

Read the API docsSet up your assistant

Every product has its own reference in the docs. Something the list does not give you? Tell us.

Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.

MCP server

Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.

Add it to your assistant

CLI

The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.

See the commands

API docs

The free list's API, documented end to end with real responses: the filters, the formats, the limits.

Read the docs

llms.txt

The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.

Open llms.txt

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list.
Command line
The same tool without an assistant, from a terminal. Add --json for JSON.hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows).
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.