HProxy · Free United Kingdom SOCKS4 pool

GBFree United Kingdom SOCKS4 proxy list 2026

Every proxy below speaks SOCKS4 from an address in the United Kingdom, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.

Download 3 (.txt)
All free proxies
GBUnited KingdomElite
31.76.34.91:1080
68%2139 ms
HTTPCLOUDRIX-RU
GBUnited KingdomElite
89.238.128.230:1080
38%2820 ms
SOCKS4M247
GBUnited KingdomElite
178.83.46.167:1080
23%5074 ms
SOCKS4OVH

253 more United Kingdom SOCKS4 endpoints we are still checking

Alongside the 3 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 23,708 times across 313,570 checks we have run, the most recent of them answering 3 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free United Kingdom SOCKS4 proxy endpoints that are not responding right now and are still being re-checked
EndpointLast answeredTimes answered
8.211.195.173:80812026-10-31 3 days ago370 / 5,163
167.99.198.192:100002026-10-30 4 days ago34 / 221
8.211.195.173:80602026-10-29 5 days ago277 / 4,860
82.9.133.51:91502026-10-28 7 days ago973 / 4,337
8.211.195.139:50602026-10-27 8 days ago279 / 4,891
5.157.64.213:10802026-10-26 9 days ago1,893 / 7,481
86.53.189.84:10802026-10-25 10 days ago4 / 359
8.211.194.78:90982026-10-24 11 days ago282 / 4,965
64.227.33.183:100002026-10-21 14 days ago4 / 192
66.163.117.165:400002026-10-17 18 days ago41 / 227
206.245.166.179:802026-10-16 18 days ago20 / 210
144.126.203.139:100002026-10-16 19 days ago18 / 228
Show 88 more endpoints
Further United Kingdom SOCKS4 proxy endpoints that are not responding right now
EndpointLast answeredTimes answered
144.126.203.119:100002026-10-16 19 days ago14 / 219
8.211.195.139:31282026-10-16 19 days ago242 / 4,681
45.91.54.160:10802026-10-15 19 days ago15 / 360
8.211.194.78:1112026-10-15 20 days ago348 / 5,627
13.134.180.84:4432026-10-14 21 days ago10 / 174
8.211.195.139:81232026-10-14 21 days ago250 / 4,861
8.211.195.173:55552026-10-13 21 days ago286 / 4,870
31.76.40.187:10802026-10-12 23 days ago6 / 353
8.211.200.183:80902026-10-11 24 days ago243 / 4,999
8.211.194.85:33332026-10-10 24 days ago240 / 4,562
8.211.194.78:1432026-10-10 25 days ago326 / 5,290
8.211.195.139:88882026-10-10 25 days ago238 / 4,620
52.56.231.224:4432026-10-10 25 days ago12 / 208
8.211.195.173:50602026-10-07 28 days ago272 / 4,710
185.73.39.118:99992026-10-06 29 days ago343 / 553
8.211.195.173:180802026-10-06 29 days ago321 / 5,639
8.211.195.139:41002026-10-05 a month ago221 / 4,547
8.211.195.139:80812026-10-05 a month ago238 / 4,887
68.183.35.25:100002026-10-05 a month ago14 / 230
8.211.194.78:90002026-10-04 a month ago22 / 839
8.211.195.139:88892026-10-03 a month ago235 / 4,733
178.128.165.127:100002026-10-02 a month ago37 / 253
8.211.194.85:1002026-10-01 a month ago289 / 4,759
91.107.122.209:10802026-09-29 a month ago1,160 / 5,869
8.211.200.183:10812026-09-29 a month ago316 / 4,750
57.129.157.57:90002026-09-29 a month ago1 / 123
213.171.212.110:89892026-09-27 a month ago59 / 378
8.211.194.78:80802026-09-27 a month ago363 / 5,673
104.239.83.248:90522026-09-26 a month ago111 / 1,010
104.239.83.248:90542026-09-26 a month ago13 / 237
8.211.194.78:63792026-09-26 a month ago265 / 4,478
104.239.83.248:90562026-09-26 a month ago86 / 590
8.211.195.139:89992026-09-25 a month ago216 / 4,609
104.239.83.248:90502026-09-25 a month ago76 / 1,229
45.150.66.94:10802026-09-25 a month ago2 / 158
45.150.66.190:10802026-09-25 a month ago2 / 158
78.141.235.133:10802026-09-24 a month ago12 / 193
8.211.200.183:50602026-09-24 a month ago398 / 5,820
178.79.180.31:10882026-09-24 a month ago36 / 213
8.211.195.173:12342026-09-24 a month ago325 / 4,904
8.211.194.85:63792026-09-24 a month ago303 / 5,451
88.80.186.173:191002026-09-23 a month ago408 / 4,527
8.211.195.173:100002026-09-22 a month ago198 / 4,988
194.164.125.208:574222026-09-22 a month ago1,078 / 5,491
104.239.83.250:90522026-09-20 2 months ago1 / 211
104.239.83.250:90502026-09-19 2 months ago5 / 221
104.239.83.246:90592026-09-18 2 months ago49 / 330
104.239.83.246:90562026-09-18 2 months ago3 / 231
104.239.83.246:90512026-09-18 2 months ago7 / 231
104.239.83.250:90562026-09-18 2 months ago4 / 316
104.239.83.246:90522026-09-18 2 months ago14 / 257
8.211.194.85:4432026-09-18 2 months ago40 / 1,690
104.239.83.246:90502026-09-18 2 months ago21 / 284
138.124.137.82:10802026-09-17 2 months ago232 / 2,934
8.211.194.85:80812026-09-17 2 months ago103 / 2,871
8.211.200.183:31282026-09-17 2 months ago345 / 5,299
8.211.200.183:10802026-09-16 2 months ago265 / 4,609
8.211.194.78:84432026-09-16 2 months ago366 / 5,486
57.129.134.10:80862026-09-16 2 months ago84 / 559
193.32.176.109:10802026-09-15 2 months ago368 / 3,114
8.211.200.183:40062026-09-15 2 months ago348 / 5,167
8.211.200.183:17202026-09-15 2 months ago322 / 5,000
8.211.195.139:3122026-09-15 2 months ago267 / 4,950
157.245.29.92:10802026-09-14 2 months ago187 / 460
8.211.200.183:90802026-09-12 2 months ago316 / 4,972
8.211.200.183:10002026-09-11 2 months ago323 / 4,824
87.120.219.117:10822026-09-11 2 months ago58 / 418
87.120.219.126:10822026-09-11 2 months ago35 / 346
8.211.194.85:100002026-09-11 2 months ago303 / 4,971
8.211.200.183:100022026-09-10 2 months ago293 / 4,772
8.211.194.78:66662026-09-10 2 months ago268 / 4,667
8.211.195.173:28732026-09-10 2 months ago322 / 5,188
8.211.195.173:88892026-09-10 2 months ago71 / 2,140
8.211.200.183:852026-09-10 2 months ago401 / 4,984
8.211.195.173:100012026-09-09 2 months ago282 / 4,727
8.211.194.85:314332026-09-09 2 months ago350 / 4,912
8.211.194.85:84432026-09-08 2 months ago375 / 5,161
8.211.195.139:80012026-09-08 2 months ago311 / 5,082
8.211.195.173:1002026-09-08 2 months ago334 / 4,858
8.211.194.78:812026-09-07 2 months ago355 / 4,942
8.211.195.139:802026-09-07 2 months ago277 / 4,696
8.211.195.173:80132026-09-07 2 months ago381 / 5,053
8.211.195.173:31282026-09-07 2 months ago324 / 4,876
8.211.194.78:4432026-09-07 2 months ago360 / 4,906
8.211.194.85:50602026-09-07 2 months ago291 / 4,765
8.211.200.183:81232026-09-07 2 months ago313 / 4,724
8.211.200.183:11112026-09-07 2 months ago359 / 4,812
8.211.200.183:12342026-09-07 2 months ago130 / 2,597

Showing the 100 most recently active of 253. Every one of the rest keeps its own permanent page with its full check history.

You're viewing free United Kingdom SOCKS4 proxies. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

United Kingdom SOCKS4 proxies right now, by the numbers

The pool currently holds 3 United Kingdom SOCKS4 proxies spread across 3 different networks. They respond in 2820ms at the median, much quicker than the 4826ms median across the whole free pool. The busiest exits are "Limburg an der Lahn". These figures come straight from the live pool and move every few minutes as proxies are re-verified.

By protocol

HTTP1SOCKS43SOCKS51

By anonymity

Elite3

Biggest hosting networks

M2471OVH1Cloudrix RU1

About

About these free United Kingdom SOCKS4 proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.

Get the free appCheck onlineIP lookup

The long read

About free United Kingdom SOCKS4 proxies.

The list above holds every free SOCKS4 proxy in the United Kingdom that answered our checker recently. At 16:51 UTC on 15 September 2026, 2 SOCKS4 entries in the United Kingdom were alive.

That is 11.1 percent of the 18 live entries in the United Kingdom at the same moment. SOCKS4 was the least common protocol in the country, behind SOCKS5 with 4 live entries. Among the 72 countries with live SOCKS4 entries, the United Kingdom held the 35th largest number.

2 live entries are too few for a fair success rate, so this page reports counts. For work that has to keep running, paid United Kingdom proxies are built for it.

01

What a free United Kingdom SOCKS4 proxy can reach

On 15 September 2026 we tested 21 United Kingdom SOCKS4 entries from our server in Germany. Through each one, the server fetched Cloudflare's trace page over plain HTTP and TLS, then Google's connectivity check.

United Kingdom SOCKS4 entries, tested through the entry itself
Tested 15 September 2026Entries
Tested21
Did not accept a connection18
Completed at least one request2
Carried encrypted traffic0
Opened Google0
Certificate did not verify1
Showed an exit address2
Of those, exiting in the United Kingdom0

HProxy test from one server in Germany. Every entry on the United Kingdom list was tested. Exit countries from Cloudflare's own trace. An entry that listed several protocols was tested over one: SOCKS5 first, then HTTPS, HTTP and SOCKS4.

1 entry presented a certificate that did not verify, which is how interception shows up.

02

How to use a free United Kingdom SOCKS4 proxy

Enter an entry as socks4://IP:PORT in your tool, then check the address a site sees before real work. Take several entries and rotate between them, because a free entry can drop between two checks.

Questions

Frequently asked.

Every question

Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.

At 16:51 UTC on 15 September 2026, 2 SOCKS4 entries in the United Kingdom were alive. Among the 72 countries with live SOCKS4 entries, the United Kingdom held the 35th largest number.

For work that has to keep running, HProxy sells United Kingdom proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.

No, SOCKS4 only relays the connection, so encryption has to come from the site or your own tool.

Treat them as public, because whoever runs the server can read any traffic that is not encrypted. In our test, 1 entry presented a certificate that did not verify.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.44/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Docs and AI

The free list, in your assistant and in your code.

We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.

Read the API docsSet up your assistant

Every product has its own reference in the docs. Something the list does not give you? Tell us.

Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.

MCP server

Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.

Add it to your assistant

CLI

The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.

See the commands

API docs

The free list's API, documented end to end with real responses: the filters, the formats, the limits.

Read the docs

llms.txt

The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.

Open llms.txt

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list.
Command line
The same tool without an assistant, from a terminal. Add --json for JSON.hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows).
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.