HProxy · Network block
Free proxies in 95.9.84.0/24 2026
Free proxies in the 95.9.84.0/24 block. None are answering this minute. This page is permanent: we re-verify continuously, so it refills the moment an address in the block responds again.
Showing only proxies in the block 95.9.84.0/24. The filters below search inside this block.
Search every network insteadNo proxies match these filters right now.
The pool rotates every few seconds, loosen a filter or wait for fresh IPs to stream in.
Page 1 of 1 · 0 proxies in the 48h working pool · filters: none
About these 95.9.84.0/24 proxies
These are public proxies gathered from across the web and continuously re-verified by HProxy's engine. They're free and fine for quick, low-stakes tasks. But like all public proxies they're shared, go down without warning, and are often already blocked by major sites. Always test before you rely on one.
Run any list through our free checker to see which proxies are alive, fast and anonymous right now.
Open the free proxy checkerAbout free proxies in 95.9.84.0/24
Free proxies in 95.9.84.0/24 are public proxy servers whose addresses all begin 95.9.84, meaning they share the same /24 block. This page keeps a live-checked list of them rather than a stale dump: every address here was seen running an open proxy and was responding when it was last verified, so instead of guessing which addresses in the range are usable, you get the ones that actually answered.
Open proxies cluster in blocks like this one because of how they are found. Scanners sweep whole ranges at a time, so an address that turns up an open proxy usually sits next to others that do too, which is why looking at a /24 tells you more than any single address in it. A block with proxies today tends to keep producing them.
What is the 95.9.84.0/24 block?
A /24 is a block of 256 consecutive IP addresses that share their first three octets, here 95.9.84.0 through 95.9.84.255. Networks are handed out and routed in blocks like this, so the addresses in one /24 almost always belong to the same operator and behave alike. When several proxies appear in one block, they are typically the same kind of machine on the same network.
How to use these 95.9.84.0/24 proxies
Pick an entry from the table and set its IP and port in your browser or client, matching the protocol shown. Test it against a page that echoes your address before you rely on it, and click any IP for its full live record. Because these share a block, they also tend to share a reputation: a site that has flagged one address in the range may treat the others the same way.
Free proxies churn whatever block they sit in, so pull several and rotate. If the whole 95.9.84.0/24 range goes quiet, it usually comes back together too, which is why we keep re-testing every address in it.
Free block proxies vs paid proxies
A free proxy in 95.9.84.0/24 costs nothing and is fine for research and one-off checks, but the addresses are public, shared and unstable, and a whole block can share a bad reputation. For anything repeatable that adds up fast.
HProxy's paid residential, ISP, mobile and datacenter proxies give you clean addresses with real uptime, billed by the gigabyte with no subscription. Keep the free 95.9.84.0/24 list for research and reach for paid the moment a task has to succeed.
Frequently asked
What are 95.9.84.0/24 proxies?
Public proxy servers whose IP addresses all sit in the 95.9.84.0/24 block (they begin 95.9.84). This page lists the ones currently in the HProxy pool that answered at their last live check.
Why do proxies cluster in one block?
Because open proxies are found by scanning ranges. A scanner that sweeps 95.9.84.0/24 and finds one open proxy usually finds several, since they tend to be the same kind of machine on the same network. That is why a block page shows more than any single address in it.
Are these 95.9.84.0/24 proxies free?
Yes, free to copy and use with no signup, gathered from public sources. Free means shared and unstable, so verify an entry right before you rely on it.
How often is this list updated?
Continuously. Every address in the block is re-verified on a rolling cycle; one that stops answering moves out of the live list and returns the moment it answers again.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
For AI assistants
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
Works with
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything. The button is only a shortcut for humans.
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.
claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list.
Command line
The same tool without an assistant. Prints JSON, so it pipes.
npx hproxy-mcp list --country de --protocol socks5 --limit 20REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"The whole documentation, as markdown
Generated from the same registry the docs render from, so it cannot drift from the pages.
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.