HProxy · Free Seychelles pool
Free Seychelles proxy list 2026
Every proxy below sits on an address in the Seychelles, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.
Every slice of the pool
The same live list, one thing at a time.
A page per country, protocol, anonymity grade, operator, port, network and block, each with its own count, download and API call.
Free proxies by country
24 pages
Seychelles proxies right now, by the numbers
The pool currently holds 26 Seychelles proxies spread across 6 different networks. They respond in 5258ms at the median, much slower than the 2807ms median across the whole free pool. The busiest exits are Victoria. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By anonymity
Biggest hosting networks
About
About these free Seychelles proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Verify before you use
Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.
The long read
About free Seychelles proxies.
The list above holds every free proxy in the Seychelles that answered our checker recently. Copy an address and port, and sites you open will see an address in the Seychelles.
At 09:10 UTC on 15 September 2026, 6 entries in the Seychelles were alive. 15 were in rotation, and 15 of those had been checked in the previous thirty minutes.
Only 6 entries in the Seychelles were alive, too few for a fair success rate.
Entries in the Seychelles that worked and then stopped lasted a median 7 days. On 28 September 2026, that was shorter than the whole pool's median of 10 days. 0.9 percent stopped within their first hour, and 28.4 percent lasted over thirty days. We count each entry from the day we first saw it until it stopped answering. We only count addresses with fewer than 20 of these entries. No address in the Seychelles had that many, so this rule left nothing out. We also leave out Amazon's networks and one June evening when our checker failed. Most never worked at all: 2,469 of the 2,612 entries we set aside never answered a check.
Being alive at the last check does not make an address usable. All 6 live entries were flagged for recent abuse, and 3 sat on datacenter space. For work that has to keep running, paid Seychelles proxies are built for it.
01
The Seychelles against the whole free pool
The table compares the Seychelles with the whole free pool, from the same read-only query.
| Measured 15 September 2026 | Seychelles | Whole pool |
|---|---|---|
| Live entries measured | 6 | 5,822 |
| Classed as datacenter | 50.0% | 58.0% |
| Flagged for recent abuse | 100.0% | 97.9% |
HProxy free pool, queried read-only at 09:10 UTC on 15 September 2026.
02
Protocols and grades in the Seychelles
HTTP was the most common protocol, spoken by 4 of the 6 live entries. 3 of them were graded elite, so sites saw neither your address nor a proxy header.
Among the 115 countries with live entries, the Seychelles held the 53rd largest number. Since May 2026 our checker has recorded 2,611 entries on 1,437 addresses in the Seychelles.
| Measured 15 September 2026 | Live entries |
|---|---|
| Speaks HTTP | 4 |
| Speaks HTTPS | 1 |
| Speaks SOCKS4 | 1 |
| Speaks SOCKS5 | 0 |
| Graded elite | 3 |
| Graded anonymous | 3 |
| Graded transparent | 0 |
| All live Seychelles entries | 6 |
HProxy free pool, queried read-only at 09:10 UTC on 15 September 2026. One entry can speak more than one protocol, so those rows can add up to more than the total.
03
What a free Seychelles proxy can reach
We tested all 14 listed entries on 15 September 2026, each one through the entry itself. Each one fetched Cloudflare's trace page over plain HTTP and over TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 14 |
| Did not accept a connection | 5 |
| Completed at least one request | 3 |
| Carried encrypted traffic | 2 |
| Opened Google | 3 |
| Certificate did not verify | 0 |
| Showed an exit address | 2 |
| Of those, exiting in the Seychelles | 0 |
HProxy test from one server in Germany. Exit countries from Cloudflare's own trace.
None of the 2 entries that carried encrypted traffic tampered with the site's certificate.
04
Who runs the networks behind these proxies
Live entries in the Seychelles split between data centers and internet provider networks. The names below are the network names our address data records for each AS number.
| Network | AS number | Live entries | Classed as datacenter |
|---|---|---|---|
| PT-Citra-Celebas-Multimedia | AS215208 | 2 | 2 |
| cognetcloud INC | AS401696 | 1 | 1 |
| All live Seychelles entries | All networks | 6 | 3 |
HProxy free pool, live set at 09:10 UTC on 15 September 2026.
05
How to use a free Seychelles proxy
Pick a row and note its address, port and protocol before you set it in your tool. HTTP and HTTPS entries suit browsers and scrapers, while SOCKS5 entries also carry traffic from other tools.
Take several entries and rotate between them, because a free entry can drop between two checks. A free SOCKS5 entry adds no encryption of its own, so never send a password through one.
Questions
Frequently asked.
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, all 6 live entries were flagged for recent abuse.
For work that has to keep running, HProxy sells Seychelles proxies with city targeting. They are pay as you go with no subscription, and purchased traffic has no scheduled expiry date.
Half of those that worked were gone within 7 days, against 10 days for the whole free pool. We count each one from the day we first saw it until it stopped answering. Both figures count only addresses with fewer than 20 of these entries. They also leave out Amazon's networks and one June evening when our checker failed. We measured them on 28 September 2026. Of the entries we set aside, 2,469 of 2,612 never answered a check.
On 15 September 2026 the largest networks were PT Citra and Cognetcloud. 50.0 percent of live entries were classed as datacenter.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
Docs and AI
The free list, in your assistant and in your code.
We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.
Every product has its own reference in the docs. Something the list does not give you? Tell us.
Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.
MCP server
Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.
CLI
The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.
API docs
The free list's API, documented end to end with real responses: the filters, the formats, the limits.
llms.txt
The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.
All the machine lanes- MCP server
- Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.
claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list. - Command line
- The same tool without an assistant, from a terminal. Add --json for JSON.
hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows). - REST, no key
- Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.