HProxy · Free Paraguay pool
Free Paraguay proxy list 2026
Every proxy below sits on an address in Paraguay, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.
Page 1 of 1 · 46 proxies in the 48h working pool · filters: PY
Paraguay proxies right now, by the numbers
The pool currently holds 46 Paraguay proxies spread across 13 different networks. They respond in 7629ms at the median, much slower than the 3188ms median across the whole free pool. The busiest exits are Ciudad del Este, Asuncion, Primero de Marzo. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By anonymity
Biggest hosting networks
About these free Paraguay proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Run any list through our free checker to see which proxies are alive, fast and anonymous right now.
Open the free proxy checkerAbout free Paraguay proxies
The list above holds every free proxy in Paraguay that answered our checker recently. Copy an address and port, and sites you open will see an address in Paraguay.
At 09:10 UTC on 15 September 2026, 12 entries in Paraguay were alive. 46 were in rotation, and 46 of those had been checked in the previous thirty minutes.
A live entry in Paraguay passed a median 23.3 percent of its own checks. That is close to the 25.9 percent across the whole pool. None of the 12 had passed ten checks at 90 percent or better.
Entries in Paraguay that stopped answering lived a median 72.8 hours, about 3 days. That is shorter than the whole pool's median of 144.6 hours. 15.1 percent died inside their first hour, and 6.4 percent lasted more than thirty days.
Being alive at the last check does not make an address usable. All 12 live entries were flagged for recent abuse, and 2 sat on datacenter space. For work that has to keep running, paid Paraguay proxies are built for it.
Paraguay against the whole free pool
The table compares Paraguay with the whole free pool, from the same read-only query.
| Measured 15 September 2026 | Paraguay | Whole pool |
|---|---|---|
| Live entries measured | 12 | 5,822 |
| Median success rate across its own checks | 23.3% | 25.9% |
| Passed ten checks at 90 percent | 0.0% | 6.3% |
| Median latency from our checker in Germany | 8,791 ms | 8,219 ms |
| Median lifespan of entries that died | 72.8 hours | 144.6 hours |
| Died inside the first hour | 15.1% | 21.3% |
| Classed as datacenter | 16.7% | 58.0% |
| Flagged for recent abuse | 100.0% | 97.9% |
HProxy free pool, queried read-only at 09:10 UTC on 15 September 2026. Lifespans cover every entry that died since the pool opened in May 2026.
Latency is measured from our checker in Germany, so it includes the distance to Paraguay.
What a free Paraguay proxy can reach
We tested all 46 listed entries on 15 September 2026, each one through the entry itself. Each one fetched Cloudflare's trace page over plain HTTP and over TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 46 |
| Did not accept a connection | 41 |
| Completed at least one request | 2 |
| Carried encrypted traffic | 0 |
| Opened Google | 0 |
| Certificate did not verify | 0 |
| Showed an exit address | 2 |
| Of those, exiting in Paraguay | 2 |
HProxy test from one server in Germany. Exit countries from Cloudflare's own trace.
None of the tested entries carried encrypted traffic to the end.
Who runs the networks behind these proxies
Most live entries in Paraguay sit on internet provider networks, not in data centers. The names below are the network names our address data records for each AS number.
| Network | AS number | Live entries | Classed as datacenter |
|---|---|---|---|
| Nucleo S.A. | AS27895 | 3 | 1 |
| UFINET PANAMA S.A. | AS52468 | 3 | 0 |
| TECNOLOGIA EN ELECTRONICA E INFORMATICA SOCIEDAD ANONIMA (T.E.I.S.A) | AS28103 | 2 | 0 |
| Telecel S.A. | AS23201 | 1 | 0 |
| MULTI LINK S.A. | AS262183 | 1 | 0 |
| MSW S.A. | AS267885 | 1 | 0 |
| All live Paraguay entries | All networks | 12 | 2 |
HProxy free pool, live set at 09:10 UTC on 15 September 2026.
How to use a free Paraguay proxy
Pick a row and note its address, port and protocol before you set it in your tool. HTTP and HTTPS entries suit browsers and scrapers, while SOCKS5 entries also carry traffic from other tools.
Take several entries and rotate between them, because a free entry can drop between two checks. A free SOCKS5 entry adds no encryption of its own, so never send a password through one.
Frequently asked
Are these Paraguay proxies free?
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
How long does a free Paraguay proxy last?
Not long: entries in Paraguay that died lived a median 72.8 hours. 15.1 percent died inside their first hour, and the whole pool's median is 144.6 hours.
How reliable are free Paraguay proxies?
A live entry passed a median 23.3 percent of its own checks on 15 September 2026. None of the 12 had passed ten checks at 90 percent or better.
Are free Paraguay proxies safe?
Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, all 12 live entries were flagged for recent abuse.
Which networks do Paraguay proxies run on?
On 15 September 2026 the largest networks were Nucleo S, UFINET and Tecnologia EN. 16.7 percent of live entries were classed as datacenter.
What is the alternative to a free Paraguay proxy?
For work that has to keep running, HProxy sells Paraguay proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
For AI assistants
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
Works with
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything. The button is only a shortcut for humans.
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.
claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list.
Command line
The same tool without an assistant. Prints JSON, so it pipes.
npx hproxy-mcp list --country de --protocol socks5 --limit 20REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"The whole documentation, as markdown
Generated from the same registry the docs render from, so it cannot drift from the pages.
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.