HProxy · Free Mexico Transparent pool
Free Mexico Transparent proxy list 2026
Every proxy below has an address in Mexico, graded transparent at its last check. The numbers on this page come from our own checker, measured on 15 September 2026.
MexicoTransparentMexicoTransparentMexicoTransparentMexicoTransparentMexicoTransparentMexicoTransparentMexicoTransparentYou're viewing free Mexico transparent proxies. See the full list.
Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.
Mexico Transparent proxies right now, by the numbers
The pool currently holds 114 Mexico Transparent proxies spread across 42 different networks. They respond in 7918ms at the median, slower than the 6050ms median across the whole free pool. The busiest exits are Zimapan, Ciudad de Villa de Alvarez, Morelia. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By protocol
By anonymity
About
About these free Mexico transparent proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Verify before you use
Run any list through the checker and see which proxies are alive, fast and anonymous right now.
The long read
About free Mexico transparent proxies.
The list above holds every free transparent proxy in Mexico that answered our checker recently. At 16:51 UTC on 15 September 2026, 28 transparent entries in Mexico were alive.
That is 27.2 percent of the 103 live entries in Mexico at the same moment. Among the 75 countries with live transparent entries, Mexico held the 5th largest number.
A live transparent entry in Mexico passed a median 29.9 percent of its own checks. That is close to the 35.1 percent for live transparent entries in every country. None of the 28 had passed ten checks at 90 percent or better.
27 of the 28 live entries were flagged for recent abuse, and 2 sat on datacenter space. For work that has to keep running, paid Mexico proxies are built for it.
01
Transparent entries in Mexico against the rest of the pool
The table compares these entries with all of Mexico and with transparent entries worldwide.
| Measured 15 September 2026 | Mexico Transparent | Mexico, every grade | Transparent, every country |
|---|---|---|---|
| Live entries | 28 | 103 | 702 |
| Median success rate across its own checks | 29.9% | 28.9% | 35.1% |
| Passed ten checks at 90 percent | 0.0% | 0.0% | 6.3% |
| Median latency from our checker in Germany | 6,471 ms | 6,399 ms | 8,470 ms |
| Classed as datacenter | 7.1% | 4.9% | 22.6% |
| Flagged for recent abuse | 96.4% | 99.0% | 95.2% |
HProxy free pool, one read-only query at 16:51 UTC on 15 September 2026.
Latency is measured from our checker in Germany, so it includes the distance to Mexico.
02
Which protocols the Mexico transparent entries speak
All 28 live entries spoke HTTP, and some of them spoke a second protocol too.
One entry can speak more than one protocol, so the rows add up to more than the total.
| Protocol | Live entries |
|---|---|
| HTTP | 28 |
| HTTPS | 14 |
| SOCKS4 | 0 |
| SOCKS5 | 0 |
| All live Mexico transparent entries | 28 |
HProxy free pool, live set at 16:51 UTC on 15 September 2026.
03
What a free Mexico transparent proxy can reach
On 15 September 2026 we tested 43 Mexico transparent entries from our server in Germany. Through each one, the server fetched Cloudflare's trace page over plain HTTP and TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 43 |
| Did not accept a connection | 30 |
| Completed at least one request | 6 |
| Carried encrypted traffic | 2 |
| Opened Google | 0 |
| Certificate did not verify | 0 |
| Showed an exit address | 6 |
| Of those, exiting in Mexico | 6 |
HProxy test from one server in Germany. A random sample of the Mexico list was tested. Exit countries from Cloudflare's own trace. Grades as listed when the sample was drawn.
All 6 entries that showed an exit address were exiting in Mexico. 3 of them left through an exit address different from the one on the list.
None of the 2 entries that carried encrypted traffic tampered with the site's certificate.
04
Networks under the Mexico transparent entries
The largest network under these entries was Ientc S, with 7 of the 28 live entries. The names below are the network names our address data records for each AS number.
| Network | AS number | Live entries | Classed as datacenter |
|---|---|---|---|
| IENTC S DE RL DE CV | AS28458 | 7 | 0 |
| MULTICARRIER JE S. DE R.L. DE C.V. | AS270207 | 3 | 0 |
| GTT | AS3257 | 2 | 0 |
| DIGY NETWORKS S.A DE C.V. | AS265606 | 2 | 0 |
| Uninet S.A. de C.V. | AS8151 | 1 | 0 |
| All live Mexico Transparent entries | All networks | 28 | 2 |
HProxy free pool, live set at 16:51 UTC on 15 September 2026.
05
How to use a free Mexico transparent proxy
Send one request through the entry to a page that echoes your address and headers. Take several entries and rotate between them, because a free entry can drop between two checks.
Questions
Frequently asked.
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
At 16:51 UTC on 15 September 2026, 28 transparent entries in Mexico were alive. Among the 75 countries with live transparent entries, Mexico held the 5th largest number.
A live entry passed a median 29.9 percent of its own checks on 15 September 2026. None of the 28 had passed ten checks at 90 percent or better.
On 15 September 2026 the largest networks were Ientc S, Multicarrier JE and GTT. Our address data classed 2 of the 28 live entries as datacenter space.
A transparent grade means the proxy passed your real address on to the site.
Yes: on 15 September 2026, all 6 visible exits were in Mexico. 3 of them left through an exit address different from the one on the list.
Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, 27 of 28 live entries were flagged for recent abuse.
For work that has to keep running, HProxy sells Mexico proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
Docs and AI
The free list, in your assistant and in your code.
We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude Code, Cursor, Windsurf or any assistant that speaks MCP, and the list's API is documented end to end.
Every product has its own reference in the docs. Something the list does not give you? Tell us.
Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.
MCP server
Built by us: the free proxy list, the checker and the IP lookup as tools in Claude Code, Claude Desktop, Cursor, Windsurf or anything on stdio. No key, no account.
CLI
The list from a terminal: npx hproxy-mcp list --country de --limit 20. One line, nothing to install.
API docs
The free list's API, documented end to end with real responses: the filters, the formats, the limits.
llms.txt
The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.
All the machine lanes- MCP server
- Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.
claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list. - Command line
- The same tool without an assistant. Prints JSON, so it pipes.
npx hproxy-mcp list --country de --protocol socks5 --limit 20 - REST, no key
- Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.