HProxy · Free Libya pool
Free Libya proxy list 2026
Every proxy below sits on an address in Libya, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.
Every slice of the pool
The same live list, one thing at a time.
A page per country, protocol, anonymity grade, operator, port, network and block, each with its own count, download and API call.
Libya proxies right now, by the numbers
The pool currently holds 73 Libya proxies spread across 5 different networks. They respond in 6449ms at the median, much slower than the 2252ms median across the whole free pool. The busiest exits are Tripoli, Benghazi, Waddan. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By anonymity
Biggest hosting networks
About
About these free Libya proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Verify before you use
Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.
The long read
About free Libya proxies.
The list above holds every free proxy in Libya that answered our checker recently. Copy an address and port, and sites you open will see an address in Libya.
At 09:10 UTC on 15 September 2026, 13 entries in Libya were alive. 74 were in rotation, and 74 of those had been checked in the previous thirty minutes.
A live entry in Libya passed a median 20.7 percent of its own checks. That is below the 25.9 percent across the whole pool. None of the 13 had passed ten checks at 90 percent or better.
Most never worked at all: 243 of the 264 entries we set aside never answered a check.
Being alive at the last check does not make an address usable. 12 of the 13 live entries were flagged for recent abuse, and 1 sat on datacenter space. For work that has to keep running, paid Libya proxies are built for it.
01
Libya against the whole free pool
The table compares Libya with the whole free pool, from the same read-only query.
| Measured 15 September 2026 | Libya | Whole pool |
|---|---|---|
| Live entries measured | 13 | 5,822 |
| Median success rate across its own checks | 20.7% | 25.9% |
| Passed ten checks at 90 percent | 0.0% | 6.3% |
| Median latency from our checker in Germany | 5,558 ms | 8,219 ms |
| Classed as datacenter | 7.7% | 58.0% |
| Flagged for recent abuse | 92.3% | 97.9% |
HProxy free pool, queried read-only at 09:10 UTC on 15 September 2026.
Latency is measured from our checker in Germany, so it includes the distance to Libya.
02
Protocols and grades in Libya
HTTPS was the most common protocol, spoken by 10 of the 13 live entries. No grade held a majority: 5 were elite, 3 anonymous and 5 transparent.
Among the 115 countries with live entries, Libya held the 38th largest number. Since May 2026 our checker has recorded 335 entries on 291 addresses in Libya.
| Measured 15 September 2026 | Live entries |
|---|---|
| Speaks HTTP | 8 |
| Speaks HTTPS | 10 |
| Speaks SOCKS4 | 0 |
| Speaks SOCKS5 | 0 |
| Graded elite | 5 |
| Graded anonymous | 3 |
| Graded transparent | 5 |
| All live Libya entries | 13 |
HProxy free pool, queried read-only at 09:10 UTC on 15 September 2026. One entry can speak more than one protocol, so those rows can add up to more than the total.
03
What a free Libya proxy can reach
We tested all 74 listed entries on 15 September 2026, each one through the entry itself. Each one fetched Cloudflare's trace page over plain HTTP and over TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 74 |
| Did not accept a connection | 64 |
| Completed at least one request | 4 |
| Carried encrypted traffic | 1 |
| Opened Google | 1 |
| Certificate did not verify | 0 |
| Showed an exit address | 4 |
| Of those, exiting in Libya | 4 |
HProxy test from one server in Germany. Exit countries from Cloudflare's own trace.
None of the 1 entries that carried encrypted traffic tampered with the site's certificate.
04
Who runs the networks behind these proxies
Most live entries in Libya sit on internet provider networks, not in data centers. The names below are the network names our address data records for each AS number.
| Network | AS number | Live entries | Classed as datacenter |
|---|---|---|---|
| LTT Autonomous System, Tripoli Libya | AS21003 | 6 | 0 |
| Aljeel Aljadeed For Technology | AS37284 | 4 | 0 |
| Giga for Telecommunication and Technology Limited | AS328539 | 3 | 1 |
| All live Libya entries | All networks | 13 | 1 |
HProxy free pool, live set at 09:10 UTC on 15 September 2026.
05
How to use a free Libya proxy
Pick a row and note its address, port and protocol before you set it in your tool. HTTP and HTTPS entries suit browsers and scrapers, while SOCKS5 entries also carry traffic from other tools.
Take several entries and rotate between them, because a free entry can drop between two checks. A free SOCKS5 entry adds no encryption of its own, so never send a password through one.
Questions
Frequently asked.
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, 12 of 13 live entries were flagged for recent abuse.
For work that has to keep running, HProxy sells Libya proxies with city targeting. They are pay as you go with no subscription, and purchased traffic has no scheduled expiry date.
A live entry passed a median 20.7 percent of its own checks on 15 September 2026. None of the 13 had passed ten checks at 90 percent or better.
On 15 September 2026 the largest networks were LTT Autonomous, Aljeel Aljadeed and Giga For. 7.7 percent of live entries were classed as datacenter.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
Docs and AI
The free list, in your assistant and in your code.
We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.
Every product has its own reference in the docs. Something the list does not give you? Tell us.
Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.
MCP server
Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.
CLI
The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.
API docs
The free list's API, documented end to end with real responses: the filters, the formats, the limits.
llms.txt
The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.
All the machine lanes- MCP server
- Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.
claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list. - Command line
- The same tool without an assistant, from a terminal. Add --json for JSON.
hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows). - REST, no key
- Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.