HProxy · Free Austria pool

ATFree Austria proxy list 2026

Every proxy below sits on an address in Austria, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.

ATAustriaElite
38.180.143.77:40000
65%678 ms
SOCKS4M247
ATAustriaAnonymous
89.185.126.101:8080
54%3467 ms
HTTPAS MACRO: AS-24953 (customers)
ATAustriaElite
90.146.196.18:8080
46%4208 ms
HTTPSLinz, Austria
ATAustriaElite
83.218.186.22:5678
40%4878 ms
SOCKS4myNET gmbh
ATAustriaElite
159.195.110.240:8080
39%5835 ms
HTTPSnetcup GmbH
ATAustriaElite
213.173.75.222:5678
37%3600 ms
SOCKS4UNSPECIFIED
ATAustriaElite
178.189.56.158:4153
31%7896 ms
SOCKS4A1 Telekom Austria AG
ATAustriaElite
78.153.130.53:9050
14%6458 ms
SOCKS4AEZA-AS
ATAustriaAnonymous
178.115.230.100:8080
10%13137 ms
HTTP==> TELE2 AUSTRIA <==
ATAustriaTransparent
178.115.236.219:8080
9%3006 ms
HTTP==> TELE2 AUSTRIA <==
ATAustriaTransparent
158.255.212.55:9090
5%632 ms
HTTPEDIS-AS-EU
ATAustriaTransparent
158.255.212.55:7497
5%752 ms
HTTPEDIS-AS-EU
ATAustriaTransparent
158.255.212.55:10013
4%570 ms
HTTPEDIS-AS-EU
ATAustriaTransparent
77.119.240.209:8080
3%660 ms
HTTP==> TELE2 AUSTRIA <==
ATAustriaElite
165.225.248.13:11977
1%468 ms
HTTPZSCALER-EMEA
ATAustriaElite
136.226.198.13:10919
1%739 ms
HTTPZSCALER-EMEA
ATAustriaReads your HTTPS
194.182.187.78:1080
22%4498 ms
SOCKS5exoscale
ATAustriaReads your HTTPS
194.182.187.78:3128
18%317 ms
HTTPexoscale

100 more Austria endpoints we are still checking

Alongside the 18 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 23,329 times across 102,233 checks we have run, the most recent of them answering 10 days ago. Open any endpoint for its full history.

Not respondingStill checked on a permanent cycle. Never removed from the list.
Free Austria proxy endpoints that are not responding right now and are still being re-checked
EndpointLast answeredTimes answered
158.255.212.55:104342026-10-10 10 days ago256 / 4,458
158.255.212.55:77882026-10-10 10 days ago63 / 1,232
158.255.212.55:78392026-10-10 10 days ago371 / 6,304
158.255.212.55:55662026-10-10 10 days ago326 / 6,178
158.255.212.55:118572026-10-08 12 days ago165 / 3,198
80.64.140.202:80802026-10-07 14 days ago9 / 192
136.226.198.13:109772026-10-05 15 days ago6 / 392
165.225.200.16:300012026-10-05 15 days ago5 / 375
165.225.200.38:112572026-10-04 17 days ago1 / 180
165.225.200.41:117212026-10-04 17 days ago1 / 180
165.225.200.38:31282026-10-04 17 days ago1 / 178
83.215.25.66:90502026-10-03 17 days ago4 / 405
Show 88 more endpoints
Further Austria proxy endpoints that are not responding right now
EndpointLast answeredTimes answered
136.226.198.13:123452026-10-03 18 days ago5 / 225
165.225.200.14:111112026-10-03 18 days ago5 / 259
165.225.248.13:111112026-10-03 18 days ago5 / 228
165.225.200.17:122282026-10-03 18 days ago9 / 544
152.53.183.107:80822026-10-02 18 days ago1,688 / 1,885
152.53.183.107:80812026-10-02 18 days ago1,812 / 2,009
158.255.212.55:32562026-10-01 20 days ago149 / 3,504
185.175.58.225:188892026-09-30 20 days ago28 / 685
193.233.233.62:567362026-09-30 20 days ago546 / 973
193.233.233.62:218402026-09-30 20 days ago109 / 244
158.255.212.55:93002026-09-29 21 days ago247 / 4,831
185.196.178.238:606062026-09-26 24 days ago596 / 2,673
158.255.212.55:94802026-09-25 25 days ago229 / 4,482
158.255.212.55:97452026-09-24 27 days ago175 / 3,154
193.233.232.226:31282026-09-21 29 days ago939 / 2,293
178.115.242.199:80802026-09-17 a month ago88 / 735
165.225.248.13:109302026-09-17 a month ago9 / 709
158.255.212.55:90052026-09-15 a month ago279 / 5,188
165.225.200.14:802026-09-15 a month ago1 / 216
46.102.156.44:31282026-09-14 a month ago457 / 932
165.225.200.17:111112026-09-12 a month ago4 / 386
165.225.248.13:104432026-09-12 a month ago4 / 308
165.225.248.13:111012026-09-12 a month ago2 / 359
165.225.200.16:107242026-09-12 a month ago3 / 302
136.226.198.13:124682026-09-12 a month ago1 / 252
165.225.200.14:120402026-09-12 a month ago2 / 274
165.225.200.16:124032026-09-12 a month ago2 / 298
147.161.130.13:123452026-09-12 a month ago3 / 340
165.225.200.17:112302026-09-10 a month ago1 / 217
165.225.200.16:120842026-09-10 a month ago1 / 218
165.225.200.16:114802026-09-10 a month ago1 / 219
165.225.248.13:118682026-09-10 a month ago1 / 218
165.225.248.13:113892026-09-10 a month ago1 / 217
165.225.200.15:802026-09-10 a month ago5 / 227
165.225.200.17:117112026-09-10 a month ago1 / 222
89.185.126.130:80802026-09-10 a month ago121 / 512
95.163.176.131:10802026-09-09 a month ago375 / 2,958
77.244.249.95:31282026-09-08 a month ago101 / 338
89.58.19.20:4432026-09-06 a month ago165 / 654
62.60.239.29:31282026-09-04 2 months ago128 / 365
62.60.239.29:31292026-09-04 2 months ago105 / 356
193.233.232.49:31312026-09-01 2 months ago151 / 352
152.53.136.178:100002026-08-31 2 months ago399 / 705
152.53.53.54:108012026-08-31 2 months ago55 / 294
165.225.200.17:116912026-08-24 2 months ago1 / 267
152.53.209.196:88892026-08-21 2 months ago151 / 477
62.60.238.191:4432026-08-18 2 months ago684 / 1,945
95.163.153.221:10802026-08-18 2 months ago384 / 966
152.53.209.196:90912026-08-18 2 months ago17 / 296
152.53.209.196:100002026-08-17 2 months ago7 / 285
80.64.141.199:313372026-08-16 2 months ago42 / 420
80.64.140.192:313372026-08-16 2 months ago38 / 410
165.225.200.14:105122026-08-16 2 months ago1 / 264
165.225.200.16:94432026-08-16 2 months ago1 / 288
152.53.210.85:80812026-08-11 2 months ago4,911 / 5,139
95.163.153.238:10802026-08-08 2 months ago2 / 270
165.225.248.13:112632026-08-08 2 months ago2 / 273
165.225.200.21:300012026-08-08 2 months ago4 / 264
147.161.130.13:117162026-08-04 3 months ago6 / 427
136.226.198.13:128382026-08-03 3 months ago5 / 416
136.226.198.13:109302026-08-03 3 months ago11 / 414
136.226.198.13:112672026-08-03 3 months ago8 / 401
165.225.200.17:107722026-08-01 3 months ago6 / 300
152.53.228.24:191502026-07-30 3 months ago67 / 855
212.113.106.198:9872026-07-29 3 months ago334 / 2,701
152.53.209.196:10802026-07-29 3 months ago1,394 / 1,812
178.115.255.177:56782026-07-27 3 months ago249 / 2,630
212.113.119.212:10802026-07-26 3 months ago27 / 316
152.53.251.231:180802026-07-25 3 months ago128 / 430
165.225.200.14:300012026-07-20 3 months ago3 / 438
165.225.200.17:116542026-07-18 3 months ago5 / 300
165.225.200.17:300012026-07-18 3 months ago1 / 295
152.53.144.223:10802026-07-15 3 months ago2,811 / 3,205
152.53.37.93:10802026-07-09 3 months ago14 / 301
95.163.153.30:84432026-07-04 4 months ago3 / 285
185.196.178.40:41452026-07-04 4 months ago16 / 1,125
152.53.137.180:10812026-06-30 4 months ago1,082 / 1,407
212.113.119.107:10802026-06-19 4 months ago83 / 422
77.110.116.93:74432026-06-19 4 months ago479 / 835
68.210.200.151:99992026-06-16 4 months ago6 / 150
80.64.140.251:80802026-06-14 4 months ago1 / 148
80.245.197.246:802026-06-14 4 months ago1 / 149
89.58.17.90:90502026-06-14 4 months ago1 / 148
158.255.209.237:802026-06-14 4 months ago1 / 149
80.109.100.2:80802026-06-14 4 months ago13 / 196
147.45.41.112:10802026-06-14 4 months ago11 / 233
152.53.53.166:10802026-06-14 4 months ago75 / 374
62.60.238.215:80802026-06-13 4 months ago27 / 175

You're viewing free Austria proxies. See the full list.

Browse the complete free proxy list: every country, protocol and anonymity grade, in one live view.

View the full free proxy list

Every slice of the pool

The same live list, one thing at a time.

A page per country, protocol, anonymity grade, operator, port, network and block, each with its own count, download and API call.

Austria proxies right now, by the numbers

The pool currently holds 18 Austria proxies spread across 12 different networks. They respond in 3467ms at the median, slower than the 2241ms median across the whole free pool. The busiest exits are Vienna, Hirtenberg, Kindberg. These figures come straight from the live pool and move every few minutes as proxies are re-verified.

About

About these free Austria proxies

These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.

Verify before you use

Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.

The long read

About free Austria proxies.

The list above holds every free proxy in Austria that answered our checker recently. Copy an address and port, and sites you open will see an address in Austria.

At 09:10 UTC on 15 September 2026, 4 entries in Austria were alive. 24 were in rotation, and 24 of those had been checked in the previous thirty minutes.

Only 4 entries in Austria were alive, too few for a fair success rate.

Entries in Austria that worked and then stopped lasted a median 4 days. On 28 September 2026, that was shorter than the whole pool's median of 10 days. 12.3 percent stopped within their first hour, and 21.9 percent lasted over thirty days. We count each entry from the day we first saw it until it stopped answering. We only count addresses with fewer than 20 of these entries. No address in Austria had that many, so this rule left nothing out. We also leave out Amazon's networks and one June evening when our checker failed. Most never worked at all: 557 of the 637 entries we set aside never answered a check.

01

What a free Austria proxy can reach

We tested all 20 listed entries on 15 September 2026, each one through the entry itself. Each one fetched Cloudflare's trace page over plain HTTP and over TLS, then Google's connectivity check.

Entries on the Austria list, tested through the entry itself
Tested 15 September 2026Entries
Tested20
Did not accept a connection7
Completed at least one request1
Carried encrypted traffic1
Opened Google1
Certificate did not verify0
Showed an exit address1
Of those, exiting in Austria0

HProxy test from one server in Germany. Exit countries from Cloudflare's own trace.

None of the 1 entries that carried encrypted traffic tampered with the site's certificate.

02

How to use a free Austria proxy

Pick a row and note its address, port and protocol before you set it in your tool. HTTP and HTTPS entries suit browsers and scrapers, while SOCKS5 entries also carry traffic from other tools.

Take several entries and rotate between them, because a free entry can drop between two checks. A free SOCKS5 entry adds no encryption of its own, so never send a password through one.

Questions

Frequently asked.

Every question

Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.

Treat them as public, because whoever runs the server can read any traffic that is not encrypted.

Half of those that worked were gone within 4 days, against 10 days for the whole free pool. We count each one from the day we first saw it until it stopped answering. Both figures count only addresses with fewer than 20 of these entries. They also leave out Amazon's networks and one June evening when our checker failed. We measured them on 28 September 2026. Of the entries we set aside, 557 of 637 never answered a check.

For work that has to keep running, HProxy sells Austria proxies with city targeting. They are pay as you go with no subscription, and purchased traffic has no scheduled expiry date.

Upgrade to the paid network

Need pools that stay clean?

Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.

Clean residential poolsCity-level targetingSticky sessions up to 24 h

Starting from

$0.44/GB

Billed per GB · balance never expires

Get started freeCompare plans & pricing

Let your assistant pull the list

The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.

The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.

All the machine lanes
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list.
Command line
The same tool without an assistant, from a terminal. Add --json for JSON.hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows).
REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"

Instructions for an assistant, in full

Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.

You can use HProxy's free proxy list, which needs no API key and no account.

GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.

Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.

These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt

There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.

Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.

About this list & IP removal

Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.