HProxy · Free Iraq SOCKS4 pool
Free Iraq SOCKS4 proxy list 2026
Every proxy below speaks SOCKS4 from an address in Iraq, re-checked on a rolling cycle. The numbers on this page come from our own checker, measured on 15 September 2026.
Iraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AliveIraq✓ AlivePage 1 of 1 · 11 proxies in the 48h working pool · filters: SOCKS4, IQ
1 more Iraq SOCKS4 endpoint we are still checking
Alongside the 11 answering right now, these addresses are in our free proxy database and are not responding at the moment. We do not delete them and we do not stop: every one is re-tested on a permanent cycle, and any of them can come back into the live list the moment it answers again. Between them they have responded 124 times across 317 checks we have run, the most recent of them answering 1 month ago. Open any endpoint for its full history.
| Endpoint | Last answered | Times answered |
|---|---|---|
| 178.17.60.210:1080 | 2026-08-11 1 month ago | 124 / 317 |
Iraq SOCKS4 proxies right now, by the numbers
The pool currently holds 11 Iraq SOCKS4 proxies spread across 5 different networks. They respond in 3473ms at the median, slower than the 2623ms median across the whole free pool. The busiest exits are Baghdad, Sulaymaniyah, Erbil. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By protocol
By anonymity
Biggest hosting networks
About these free Iraq SOCKS4 proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Run any list through our free checker to see which proxies are alive, fast and anonymous right now.
Open the free proxy checkerAbout free Iraq SOCKS4 proxies
The list above holds every free SOCKS4 proxy in Iraq that answered our checker recently. At 16:51 UTC on 15 September 2026, 4 SOCKS4 entries in Iraq were alive.
That is 57.1 percent of the 7 live entries in Iraq at the same moment. SOCKS4 was the most common protocol in the country, ahead of HTTPS with 2 live entries. Among the 72 countries with live SOCKS4 entries, Iraq held the 23rd largest number.
4 live entries are too few for a fair success rate, so this page reports counts. For work that has to keep running, paid Iraq proxies are built for it.
What a free Iraq SOCKS4 proxy can reach
On 15 September 2026 we tested 11 Iraq SOCKS4 entries from our server in Germany. Through each one, the server fetched Cloudflare's trace page over plain HTTP and TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 11 |
| Did not accept a connection | 5 |
| Completed at least one request | 0 |
| Carried encrypted traffic | 0 |
| Opened Google | 0 |
| Certificate did not verify | 0 |
| Showed an exit address | 0 |
| Of those, exiting in Iraq | 0 |
HProxy test from one server in Germany. Every entry on the Iraq list was tested. Exit countries from Cloudflare's own trace. An entry that listed several protocols was tested over one: SOCKS5 first, then HTTPS, HTTP and SOCKS4.
None of the tested entries carried encrypted traffic all the way to the site.
How to use a free Iraq SOCKS4 proxy
Enter an entry as socks4://IP:PORT in your tool, then check the address a site sees before real work. Take several entries and rotate between them, because a free entry can drop between two checks.
Frequently asked
Are these Iraq SOCKS4 proxies free?
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
Does a free Iraq SOCKS4 proxy encrypt my traffic?
No, SOCKS4 only relays the connection, so encryption has to come from the site or your own tool.
How many free SOCKS4 proxies are there in Iraq?
At 16:51 UTC on 15 September 2026, 4 SOCKS4 entries in Iraq were alive. Among the 72 countries with live SOCKS4 entries, Iraq held the 23rd largest number.
Are free Iraq SOCKS4 proxies safe?
Treat them as public, because whoever runs the server can read any traffic that is not encrypted.
What is the alternative to a free Iraq SOCKS4 proxy?
For work that has to keep running, HProxy sells Iraq proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
For AI assistants
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
Works with
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything. The button is only a shortcut for humans.
MCP server
Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself.
claude mcp add hproxy -- npx -y hproxy-mcpCursor, Claude Desktop, Windsurf and Cline take the same server as {"command": "npx", "args": ["-y", "hproxy-mcp"]}. This page's tool is proxy_list.
Command line
The same tool without an assistant. Prints JSON, so it pipes.
npx hproxy-mcp list --country de --protocol socks5 --limit 20REST, no key
Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"The whole documentation, as markdown
Generated from the same registry the docs render from, so it cannot drift from the pages.
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: install it with npx -y hproxy-mcp and use the proxy_list tool. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.