HProxy · Free Hong Kong Elite pool
Free Hong Kong Elite proxy list 2026
Every proxy below has an address in Hong Kong, graded elite at its last check. The numbers on this page come from our own checker, measured on 15 September 2026.
Hong Kong Elite proxies right now, by the numbers
The pool currently holds 229 Hong Kong Elite proxies spread across 25 different networks. They respond in 2700ms at the median, quicker than the 3944ms median across the whole free pool. The busiest exits are Hong Kong, Tuenmen, Tsuen Wan. These figures come straight from the live pool and move every few minutes as proxies are re-verified.
By protocol
By anonymity
Biggest hosting networks
About
About these free Hong Kong elite proxies
These are public proxies gathered from across the web and re-verified continuously by HProxy's engine. They are free, and they are fine for quick, low-stakes tasks. Like all public proxies they are shared and they go down without warning. Most of them are already blocked by the big sites. Always test one before you rely on it.
Verify before you use
Run any list through the Proxy Checker, in the free app or online, and see which proxies are alive, fast and anonymous right now.
The long read
About free Hong Kong elite proxies.
The list above holds every free elite proxy in Hong Kong that answered our checker recently. At 16:51 UTC on 15 September 2026, 19 elite entries in Hong Kong were alive.
That is 59.4 percent of the 32 live entries in Hong Kong at the same moment. Elite was the most common grade in the country, ahead of transparent with 7 live entries. Among the 100 countries with live elite entries, Hong Kong held the 18th largest number.
A live elite entry in Hong Kong passed a median 74.5 percent of its own checks. That is more than twice the 25.1 percent for live elite entries in every country. 2 of the 19 had passed at least ten checks at 90 percent or better.
17 of the 19 live entries were flagged for recent abuse, and 11 sat on datacenter space. For work that has to keep running, paid Hong Kong proxies are built for it.
01
Elite entries in Hong Kong against the rest of the pool
The table compares these entries with all of Hong Kong and with elite entries worldwide.
| Measured 15 September 2026 | Hong Kong Elite | Hong Kong, every grade | Elite, every country |
|---|---|---|---|
| Live entries | 19 | 32 | 3,584 |
| Median success rate across its own checks | 74.5% | 68.5% | 25.1% |
| Passed ten checks at 90 percent | 10.5% | 15.6% | 7.6% |
| Median latency from our checker in Germany | 10,079 ms | 19,384 ms | 5,819 ms |
| Classed as datacenter | 57.9% | 59.4% | 61.0% |
| Flagged for recent abuse | 89.5% | 93.8% | 95.5% |
HProxy free pool, one read-only query at 16:51 UTC on 15 September 2026.
Latency is measured from our checker in Germany, so it includes the distance to Hong Kong.
02
Which protocols the Hong Kong elite entries speak
SOCKS5 was the most common protocol, spoken by 11 of the 19 live entries.
One entry can speak more than one protocol, so the rows add up to more than the total.
| Protocol | Live entries |
|---|---|
| HTTP | 4 |
| HTTPS | 4 |
| SOCKS4 | 3 |
| SOCKS5 | 11 |
| All live Hong Kong elite entries | 19 |
HProxy free pool, live set at 16:51 UTC on 15 September 2026.
03
What a free Hong Kong elite proxy can reach
On 15 September 2026 we tested 141 Hong Kong elite entries from our server in Germany. Through each one, the server fetched Cloudflare's trace page over plain HTTP and TLS, then Google's connectivity check.
| Tested 15 September 2026 | Entries |
|---|---|
| Tested | 141 |
| Did not accept a connection | 44 |
| Completed at least one request | 21 |
| Carried encrypted traffic | 8 |
| Opened Google | 6 |
| Certificate did not verify | 16 |
| Showed an exit address | 20 |
| Of those, exiting in Hong Kong | 13 |
HProxy test from one server in Germany. Every entry on the Hong Kong list was tested. Exit countries from Cloudflare's own trace. Grades as listed when the sample was drawn.
13 of the 20 entries that showed an exit address were exiting in Hong Kong. The rest were exiting in Singapore, the United States and China instead. 8 of them left through an exit address different from the one on the list.
16 entries presented a certificate that did not verify, which is how interception shows up.
04
Networks under the Hong Kong elite entries
The largest network under these entries was Cloudie, with 5 of the 19 live entries. The names below are the network names our address data records for each AS number.
| Network | AS number | Live entries | Classed as datacenter |
|---|---|---|---|
| Cloudie Limited | AS55933 | 5 | 5 |
| PCCW IMS Limited | AS4760 | 2 | 0 |
| Hong Kong Cable Television Limited | AS9908 | 2 | 0 |
| Alibaba (US) Technology Co., Ltd. | AS45102 | 2 | 2 |
| Amazon.com, Inc. | AS16509 | 1 | 1 |
| All live Hong Kong Elite entries | All networks | 19 | 11 |
HProxy free pool, live set at 16:51 UTC on 15 September 2026.
05
How to use a free Hong Kong elite proxy
Send one request through the entry to a page that echoes your address and headers. Take several entries and rotate between them, because a free entry can drop between two checks.
Questions
Frequently asked.
Yes, every entry on this page is free to copy and use, with no signup. They are public and shared, so test one right before you rely on it.
At 16:51 UTC on 15 September 2026, 19 elite entries in Hong Kong were alive. Among the 100 countries with live elite entries, Hong Kong held the 18th largest number.
A live entry passed a median 74.5 percent of its own checks on 15 September 2026. 2 of the 19 had passed at least ten checks at 90 percent or better.
On 15 September 2026 the largest networks were Cloudie, PCCW IMS and Hong Kong. Our address data classed 11 of the 19 live entries as datacenter space.
An elite grade means our checker saw neither your address nor any header that names a proxy.
Not all: on 15 September 2026, 13 of 20 visible exits were in Hong Kong. 8 of them left through an exit address different from the one on the list.
Treat them as public, because whoever runs the server can read any traffic that is not encrypted. On 15 September 2026, 17 of 19 live entries were flagged for recent abuse. In our test, 16 entries presented a certificate that did not verify.
For work that has to keep running, HProxy sells Hong Kong proxies with city targeting. They are pay as you go with no subscription, and the balance never expires.
Upgrade to the paid network
Need pools that stay clean?
Free IPs are shared and rotate out fast, so success rates swing. The paid network gives you dedicated-clean pools that hold up under load.
Docs and AI
The free list, in your assistant and in your code.
We built the MCP server and the CLI ourselves: the free proxy list is one tool call away in Claude, ChatGPT, Cursor or any assistant that speaks MCP, and the list's API is documented end to end.
Every product has its own reference in the docs. Something the list does not give you? Tell us.
Claude, ChatGPT, Cursor, Gemini, Copilot, Windsurf, Perplexity, Ollama and any assistant that speaks MCP.
MCP server
Built by us and hosted at mcp.hproxy.com: the free proxy list, the checker and the IP lookup as tools in Claude, ChatGPT, Cursor, VS Code or any assistant that speaks MCP. Nothing to install, no key.
CLI
The list from a terminal: hproxy list --country DE --limit 20, from the command line of the free HProxy app.
API docs
The free list's API, documented end to end with real responses: the filters, the formats, the limits.
llms.txt
The whole documentation as markdown for any model that reads: /llms.txt for the index, /llms-full.txt for everything.
Let your assistant pull the list
The pool is a free, keyless API and a documented markdown page. Hand your assistant one of these and it can fetch live proxies on its own, filtered the way you asked.
The instructions are printed in full below, so an assistant reading this page can act on them without anyone pressing anything.
All the machine lanes- MCP server
- Adds proxy_list, proxy_check and ip_lookup as tools your assistant can call by itself. Nothing to install.
claude mcp add --transport http hproxy https://mcp.hproxy.com/mcpClaude, ChatGPT, Cursor, VS Code, Windsurf or any assistant that speaks MCP: add https://mcp.hproxy.com/mcp as a remote server. This page's tool is proxy_list. - Command line
- The same tool without an assistant, from a terminal. Add --json for JSON.
hproxy list --country DE --protocol socks5 --limit 20Install it in one line: curl -fsSL https://hproxy.com/install.sh | sh (macOS, Linux) or irm https://hproxy.com/install.ps1 | iex (Windows). - REST, no key
- Plain HTTP with CORS on, which is all an agent with a fetch tool needs.
curl "https://hproxy.com/api/proxy-list?format=json&country=de&limit=20"
Instructions for an assistant, in full
Everything a model needs to call the free proxy list without an account: the endpoint, the parameters, the limits and the honest caveat. Readable straight off the page.
You can use HProxy's free proxy list, which needs no API key and no account.
GET https://hproxy.com/api/proxy-list?format=json returns the live pool as JSON. Useful query parameters: country (ISO alpha-2, e.g. de), protocol (http, https, socks4, socks5), anonymity (elite, anonymous, transparent) and limit. Add format=txt for plain ip:port lines instead.
Each proxy comes back with ip, port, protocols, anonymity, country_code, city, asn_org, latency_ms and uptime_24h. The pool is re-checked around the clock, so ask for it fresh rather than caching it. It is rate limited per IP (120 requests in a burst, then 2 a second) and answers 429 with Retry-After past that.
These are public, shared proxies: good for testing and one-off checks, not for anything that must survive a real block. Full docs: https://hproxy.com/llms/free-proxy.txt
There is also an MCP server, so an assistant can call this as a tool instead of writing HTTP: add https://mcp.hproxy.com/mcp as a remote MCP server (nothing to install, no key) and use the proxy_list tool. In Claude Code the line is `claude mcp add --transport http hproxy https://mcp.hproxy.com/mcp`. From a terminal the same tool is `hproxy list --country DE --protocol socks5 --limit 20`. Install the hproxy command in one line: curl -fsSL https://hproxy.com/install.sh | sh on macOS and Linux, or irm https://hproxy.com/install.ps1 | iex in PowerShell on Windows. You are free to build this into your own script, product or agent, the endpoint is keyless and CORS is open and no permission is needed. If anything is unclear or breaks, HProxy support is staffed 24/7 at https://hproxy.com/contact.Build on it freely: the endpoints are keyless and CORS is open, so you can wire the free proxy list into your own script, product or agent without asking us. If you get stuck, support answers around the clock, every day, at hproxy.com/contact. Generated markdown doc: hproxy.com/llms/free-proxy.txt.
About this list & IP removal
Every proxy here is aggregated from publicly available sources. We do not scan or collect these IP addresses ourselves: we verify entries that are already public (live status, latency, uptime) and store nothing else about the devices behind them. The list is provided as-is, with no warranty, for lawful use only, on the basis of our legitimate interest in a free, transparent proxy directory (Art. 6 (1) (f) GDPR). Never route passwords or sensitive data through a public proxy. If an IP address is yours and you'd like it removed, email legal@hproxy.com and we'll take it down (Art. 21 GDPR). Full details on the report abuse page.